Static spray balls with clamp connection
Clamp DN (DIN EN 10357 Series A) and clamp inch (OD)
- Series A (DN): ball 1.4404 (316L), clamp 1.4310, matt
- Inch (OD): ball 1.4404 (316L), clamp 1.4310, ground, outside Ra ≤ 0.8 µm
- Types A/LA 360°, B 192° – 194°, G 206° – 246°, L 188°
- Recommended operating pressure 1.0 to 2.5 bar g
Clamp DN – according to DIN EN 10357 Series A / DIN 11866 Series A
| Property | Value |
|---|---|
| Connection: | clamp DN |
| Ball material: | 1.4404 (316L) |
| Clamp material: | 1.4310 |
| Surface: | matt |
Clamp inch (OD) – DIN 10357 Series C / DIN 11866 Series C / ASME-BPE 2022
| Property | Value |
|---|---|
| Connection: | clamp inch OD |
| Ball material: | 1.4404 (316L) |
| Clamp material: | 1.4310 |
| Surface: | ground, outside Ra ≤ 0.8 µm |
Spray patterns and application
| Type | Spray angle | Application |
|---|---|---|
| Type A/LA | 360° | vertical and horizontal tanks |
| Type B | 192° – 194° | directed downwards |
| Type G | 206° – 246° | directed upwards |
| Type L | 188° | directed upwards, horizontal tanks |
| Type | Spray angle | Cleaning Ø (m) | Flow rate m³/h at pressure (bar) | DA (mm) | LA (mm) | Connection | Order code | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.0 | 1.5 | 1.8 | 2.0 | 2.2 | 2.5 | |||||||
| A 05 | 360° | 1.0 – 2.0 | 5.1 | 6.2 | 6.8 | 7.2 | 7.6 | 8.1 | 28 | 46.6 | DN10 (12) | 11850-253-109.63 |
| A 05 | 360° | 1.0 – 2.0 | 5.1 | 6.2 | 6.8 | 7.2 | 7.6 | 8.1 | 28 | 46.6 | DN10 (13) | 11850-253-111.40 |
| A 05-1,0 | 360° | 0.8 – 1.0 | 2.8 | 3.4 | 3.8 | 4.0 | 4.2 | 4.4 | 28 | 46.6 | DN10 (12) | 11850-253-109.73 |
| A 05-1,0 | 360° | 0.8 – 1.0 | 2.8 | 3.4 | 3.8 | 4.0 | 4.2 | 4.4 | 28 | 46.6 | DN10 (13) | 11850-253-111.41 |
| A 1-1,0 | 360° | 1.5 – 2.0 | 3.0 | 3.7 | 4.0 | 4.2 | 4.4 | 4.7 | 64 | 84 | DN25 (29) | 11850-254-000044 |
| A 1-1,5 | 360° | 1.8 – 3.0 | 7.0 | 8.6 | 9.4 | 9.9 | 10.4 | 11.1 | 64 | 84 | DN25 (29) | 11850-254-000046 |
| A1 | 360° | 2.0 – 3.0 | 9.8 | 12.0 | 13.1 | 13.9 | 14.5 | 15.5 | 64 | 84 | DN25 (29) | 11850-254-000030 |
| A 1-1 | 360° | 2.5 – 3.5 | 12.8 | 15.7 | 17.2 | 18.1 | 19.0 | 20.2 | 64 | 84 | DN25 (29) | 11850-254-000031 |
| A 1-2 | 360° | 3.0 – 4.0 | 15.3 | 18.7 | 20.5 | 21.6 | 22.6 | 24.1 | 64 | 84 | DN25 (29) | 11850-254-000032 |
| A2 | 360° | 3.5 – 5.0 | 21.9 | 26.8 | 29.4 | 31.0 | 32.5 | 34.6 | 93 | 113.5 | DN50 (53) | 11850-254-000042 |
| A 2-1 | 360° | 4.0 – 6.0 | 28.4 | 34.8 | 38.2 | 40.2 | 42.2 | 45.0 | 93 | 113.5 | DN50 (53) | 11850-254-000040 |
| A 2-2 | 360° | 5.0 – 7.0 | 35.6 | 43.6 | 47.8 | 50.3 | 52.8 | 56.3 | 93 | 113.5 | DN50 (53) | 11850-254-000041 |
| A 2-3 | 360° | 6.0 – 8.0 | 40.9 | 50.1 | 54.9 | 57.8 | 60.7 | 64.7 | 93 | 113.5 | DN50 (53) | 11850-254-000049 |
| B 05 | 192° | 1.0 – 2.0 | 3.0 | 3.7 | 4.0 | 4.2 | 4.4 | 4.7 | 28 | 46.6 | DN10 (12) | 11850-253-109.74 |
| B 05 | 192° | 1.0 – 2.0 | 3.0 | 3.7 | 4.0 | 4.2 | 4.4 | 4.7 | 28 | 46.6 | DN10 (13) | 11850-253-111.42 |
| B1 | 192° | 2.0 – 3.0 | 9.5 | 11.6 | 12.7 | 13.4 | 14.1 | 15.0 | 64 | 84 | DN25 (29) | 11850-254-000033 |
| B2 | 194° | 3.5 – 5.0 | 22.4 | 27.4 | 30.1 | 31.7 | 33.2 | 35.4 | 93 | 113.5 | DN50 (53) | 11850-254-000050 |
| B 2-3 | 194° | 6.0 – 8.0 | 42.2 | 51.7 | 56.6 | 59.7 | 62.6 | 66.7 | 93 | 113.5 | DN50 (53) | 11850-254-000053 |
| G 05 | 232° | 1.0 – 2.0 | 4.7 | 5.8 | 6.3 | 6.6 | 7.0 | 7.4 | 28 | 46.6 | DN10 (12) | 11850-253-109.78 |
| G 05 | 232° | 1.0 – 2.0 | 4.7 | 5.8 | 6.3 | 6.6 | 7.0 | 7.4 | 28 | 46.6 | DN10 (13) | 11850-253-111.46 |
| G1 | 206° | 2.0 – 3.0 | 9.2 | 11.3 | 12.3 | 13.0 | 13.6 | 14.5 | 64 | 84 | DN25 (29) | 11850-254-000036 |
| G 1-1 | 206° | 2.5 – 3.5 | 11.2 | 13.7 | 15.0 | 15.8 | 16.6 | 17.7 | 64 | 84 | DN25 (29) | 11850-254-000037 |
| G 1-2 | 206° | 3.0 – 4.0 | 14.5 | 17.8 | 19.5 | 20.5 | 21.5 | 22.9 | 64 | 84 | DN25 (29) | 11850-254-000038 |
| G2 | 246° | 3.5 – 5.0 | 20.1 | 24.6 | 27.0 | 28.4 | 29.8 | 31.8 | 93 | 113.5 | DN50 (53) | 11850-254-000054 |
| G 2-1 | 246° | 4.0 – 6.0 | 26.8 | 32.8 | 36.0 | 37.9 | 39.8 | 42.4 | 93 | 113.5 | DN50 (53) | 11850-254-000055 |
| G 2-2 | 246° | 5.0 – 7.0 | 34.7 | 42.5 | 46.6 | 49.1 | 51.5 | 54.9 | 93 | 113.5 | DN50 (53) | 11850-254-000056 |
| G 2-3 | 246° | 6.0 – 8.0 | 41.0 | 50.2 | 55.0 | 58.0 | 60.8 | 64.8 | 93 | 113.5 | DN50 (53) | 11850-254-000057 |
| L1 | 188° | 2.5 – 3.0 | 8.6 | 10.5 | 11.5 | 12.2 | 12.8 | 13.6 | 64 | 84 | DN25 (29) | 11850-254-000045 |
| LA 1-1,0 | 360° | 1.5 – 2.5 | 5.5 | 6.7 | 7.4 | 7.8 | 8.2 | 8.7 | 64 | 84 | DN25 (29) | 11850-254-000048 |
| LA 1-1,5 | 360° | 2.5 – 3.0 | 11.0 | 13.5 | 14.8 | 15.6 | 16.3 | 17.4 | 64 | 84 | DN25 (29) | 11850-254-000047 |
- For electropolished spray balls, the flow rate is approx. 15 – 20 % higher than stated in the table.
- Recommended operating pressure 1.0 to 2.5 bar g at the spray ball inlet. Guide value for cleaning liquid: 30 to 50 l/min per metre of tank circumference.
- The annular gap between sleeve and outside diameter of the pipe serves to clean the insertion pipe. Spare retaining clamps: see special designs, spare parts and accessories.
| Type | Spray angle | Cleaning Ø (m) | Flow rate m³/h at pressure (bar) | DA (mm) | LA (mm) | Connection | Order code | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.0 | 1.5 | 1.8 | 2.0 | 2.2 | 2.5 | |||||||
| A 05 | 360° | 1.0 – 2.0 | 5.1 | 6.2 | 6.8 | 7.2 | 7.6 | 8.1 | 28 | 46.6 | ½" (12.7) | INCH-253-109.42 |
| A 05-1,0 | 360° | 0.8 – 1.0 | 2.8 | 3.4 | 3.8 | 4.0 | 4.2 | 4.4 | 28 | 46.6 | ½" (12.7) | INCH-253-111.43 |
| A 1-1,0 | 360° | 1.5 – 2.0 | 3.0 | 3.7 | 4.0 | 4.2 | 4.4 | 4.7 | 64 | 84 | 1" (25.4) | INCH-253-111.48 |
| A 1-1,5 | 360° | 1.8 – 3.0 | 7.0 | 8.6 | 9.4 | 9.9 | 10.4 | 11.1 | 64 | 84 | 1" (25.4) | INCH-253-111.49 |
| A1 | 360° | 2.0 – 3.0 | 9.8 | 12.0 | 13.1 | 13.9 | 14.5 | 15.5 | 64 | 84 | 1" (25.4) | INCH-253-109.43 |
| A 1-1 | 360° | 2.5 – 3.5 | 12.8 | 15.7 | 17.2 | 18.1 | 19.0 | 20.2 | 64 | 84 | 1" (25.4) | INCH-253-109.44 |
| A 1-2 | 360° | 3.0 – 4.0 | 15.3 | 18.7 | 20.5 | 21.6 | 22.6 | 24.1 | 64 | 84 | 1" (25.4) | INCH-253-109.47 |
| A2 | 360° | 3.5 – 5.0 | 21.9 | 26.8 | 29.4 | 31.0 | 32.5 | 34.6 | 93 | 113.5 | 2" (50.8) | INCH-253-109.49 |
| A 2-1 | 360° | 4.0 – 6.0 | 28.4 | 34.8 | 38.2 | 40.2 | 42.2 | 45.0 | 93 | 113.5 | 2" (50.8) | INCH-253-109.52 |
| A 2-2 | 360° | 5.0 – 7.0 | 35.6 | 43.6 | 47.8 | 50.3 | 52.8 | 56.3 | 93 | 113.5 | 2" (50.8) | INCH-253-109.54 |
| A 2-3 | 360° | 6.0 – 8.0 | 40.9 | 50.1 | 54.9 | 57.8 | 60.7 | 64.7 | 93 | 113.5 | 2" (50.8) | INCH-253-109.59 |
| B 05 | 192° | 1.0 – 2.0 | 3.0 | 3.7 | 4.0 | 4.2 | 4.4 | 4.7 | 28 | 46.6 | ½" (12.7) | INCH-253-111.44 |
| B1 | 192° | 2.0 – 3.0 | 9.5 | 11.6 | 12.7 | 13.4 | 14.1 | 15.0 | 64 | 84 | 1" (25.4) | INCH-253-109.50 |
| B2 | 194° | 3.5 – 5.0 | 22.4 | 27.4 | 30.1 | 31.7 | 33.2 | 35.4 | 93 | 113.5 | 2" (50.8) | INCH-253-111.51 |
| B 2-2 | Performance data on request | 93 | 113.5 | 2" (50.8) | INCH-253-111.53 | |||||||
| B 2-3 | 194° | 6.0 – 8.0 | 42.2 | 51.7 | 56.6 | 59.7 | 62.6 | 66.7 | 93 | 113.5 | 2" (50.8) | INCH-253-111.54 |
| G 05 | 232° | 1.0 – 2.0 | 4.7 | 5.8 | 6.3 | 6.6 | 7.0 | 7.4 | 28 | 46.6 | ½" (12.7) | INCH-253-111.45 |
| G1 | 206° | 2.0 – 3.0 | 9.2 | 11.3 | 12.3 | 13.0 | 13.6 | 14.5 | 64 | 84 | 1" (25.4) | INCH-253-109.06 |
| G 1-1 | 206° | 2.5 – 3.5 | 11.2 | 13.7 | 15.0 | 15.8 | 16.6 | 17.7 | 64 | 84 | 1" (25.4) | INCH-253-109.45 |
| G 1-2 | 206° | 3.0 – 4.0 | 14.5 | 17.8 | 19.5 | 20.5 | 21.5 | 22.9 | 64 | 84 | 1" (25.4) | INCH-253-109.48 |
| G2 | 246° | 3.5 – 5.0 | 20.1 | 24.6 | 27.0 | 28.4 | 29.8 | 31.8 | 93 | 113.5 | 2" (50.8) | INCH-253-109.07 |
| G 2-1 | 246° | 4.0 – 6.0 | 26.8 | 32.8 | 36.0 | 37.9 | 39.8 | 42.4 | 93 | 113.5 | 2" (50.8) | INCH-253-109.53 |
| G 2-2 | 246° | 5.0 – 7.0 | 34.7 | 42.5 | 46.6 | 49.1 | 51.5 | 54.9 | 93 | 113.5 | 2" (50.8) | INCH-253-109.55 |
| G 2-3 | 246° | 6.0 – 8.0 | 41.0 | 50.2 | 55.0 | 58.0 | 60.8 | 64.8 | 93 | 113.5 | 2" (50.8) | INCH-253-111.55 |
| L1 | 188° | 2.5 – 3.0 | 8.6 | 10.5 | 11.5 | 12.2 | 12.8 | 13.6 | 64 | 84 | 1" (25.4) | INCH-253-111.37 |
| LA 1-1,0 | 360° | 1.5 – 2.5 | 5.5 | 6.7 | 7.4 | 7.8 | 8.2 | 8.7 | 64 | 84 | 1" (25.4) | INCH-253-111.65 |
| LA 1-1,5 | 360° | 2.5 – 3.0 | 11.0 | 13.5 | 14.8 | 15.6 | 16.3 | 17.4 | 64 | 84 | 1" (25.4) | INCH-253-111.62 |
- For electropolished spray balls, the flow rate is approx. 15 – 20 % higher than stated in the table.
- Recommended operating pressure 1.0 to 2.5 bar g at the spray ball inlet. Guide value for cleaning liquid: 30 to 50 l/min per metre of tank circumference.
- The annular gap between sleeve and outside diameter of the pipe serves to clean the insertion pipe. Spare retaining clamps: see special designs, spare parts and accessories.
The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status: 03.10.2026)
Retaining clamps (with inspection certificate 3.1)
| Order code | Designation | Ball Ø | Surface | Material |
|---|---|---|---|---|
| 253-107.03 | Retaining clamp 05/M 28 | 28 mm | matt | 1.4310 |
| 253-107.06 | Retaining clamp 05/E 28 | 28 mm | electropolished | 1.4310 |
| 253-107.08 | Retaining clamp 05/M 28 | 28 mm | matt | Hastelloy C4 (2.4610) |
| 253-107.01 | Retaining clamp 1/M 64 | 64 mm | matt | 1.4310 |
| 253-107.04 | Retaining clamp 1/E 64 | 64 mm | electropolished | 1.4310 |
| 253-107.07 | Retaining clamp 1/M 64 | 64 mm | matt | Hastelloy C4 (2.4610) |
| 253-107.02 | Retaining clamp 2/M 93 | 93 mm | matt | 1.4310 |
| 253-107.05 | Retaining clamp 2/E 93 | 93 mm | electropolished | 1.4310 |
Newsletter
New products, application examples and offers in industrial cleaning technology – a few times a year, straight to your inbox.