Spray balls – special designs, spare parts and accessories
Special pipe sizes, surfaces and connections, replacement balls, retaining clamps and R-clips
- Spray balls with special pipe sizes, surfaces or connections
- Replacement spray balls for In-Line Sprayer IS 25
- Retaining clamps and R-clips with inspection certificate 3.1
Spray balls with special pipe sizes, surfaces or connections.
Clamp connection for pipe 28 mm – DN25 according to DIN 11850 Series 1 · material 1.4404 (316L) · matt
| Type | Spray angle | Cleaning Ø (m) | Flow rate m³/h at pressure (bar) | DA (mm) | LA (mm) | Connection | Order code | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.0 | 1.5 | 1.8 | 2.0 | 2.2 | 2.5 | |||||||
| A 1-1,0 | 360° | 1.5 – 2.0 | 3.0 | 3.7 | 4.0 | 4.2 | 4.4 | 4.7 | on req. | on req. | Pipe 28 | 253-109.68 |
| A 1-1,5 | 360° | 1.8 – 3.0 | 7.0 | 8.6 | 9.4 | 9.9 | 10.4 | 11.1 | on req. | on req. | Pipe 28 | 253-109.70 |
| A1 | 360° | 2.0 – 3.0 | 9.8 | 12.0 | 13.1 | 13.9 | 14.5 | 15.5 | 64 | 84 | Pipe 28 | 253-109.10 |
| A 1-1 | 360° | 2.5 – 3.5 | 12.8 | 15.7 | 17.2 | 18.1 | 19.0 | 20.2 | on req. | on req. | Pipe 28 | 253-109.11 |
| A 1-2 | 360° | 3.0 – 4.0 | 15.3 | 18.7 | 20.5 | 21.6 | 22.6 | 24.1 | on req. | on req. | Pipe 28 | 253-109.12 |
| B1 | 192° | 2.0 – 3.0 | 9.5 | 11.6 | 12.7 | 13.4 | 14.1 | 15.0 | on req. | on req. | Pipe 28 | 253-109.13 |
| B 1-2 | Performance data on request | on req. | on req. | Pipe 28 | 253-109.15 | |||||||
| L1 | 188° | 2.5 – 3.0 | 8.6 | 10.5 | 11.5 | 12.2 | 12.8 | 13.6 | on req. | on req. | Pipe 28 | 253-111.38 |
Clamp connection, other pipe sizes – Material 1.4404 (316L) · matt
| Type | Spray angle | Cleaning Ø (m) | Flow rate m³/h at pressure (bar) | DA (mm) | LA (mm) | Connection | Order code | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.0 | 1.5 | 1.8 | 2.0 | 2.2 | 2.5 | |||||||
| A 05-1,0 | 360° | 0.8 – 1.0 | 2.8 | 3.4 | 3.8 | 4.0 | 4.2 | 4.4 | on req. | on req. | DN15 | 253-109.05 |
| A1 | 360° | 2.0 – 3.0 | 9.8 | 12.0 | 13.1 | 13.9 | 14.5 | 15.5 | on req. | on req. | ISO 26.9 | 253-109.03 |
| G 1-1 | 206° | 2.5 – 3.5 | 11.2 | 13.7 | 15.0 | 15.8 | 16.6 | 17.7 | on req. | on req. | Pipe 30 | 253-109.32 |
| A2 | 360° | 3.5 – 5.0 | 21.9 | 26.8 | 29.4 | 31.0 | 32.5 | 34.6 | on req. | on req. | Pipe 52 | 253-109.82 |
Clamp connection pipe 34 – Material Alloy 59 (2.4605) · matt
| Type | Spray angle | Cleaning Ø (m) | Flow rate m³/h at pressure (bar) | DA (mm) | LA (mm) | Connection | Order code | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.0 | 1.5 | 1.8 | 2.0 | 2.2 | 2.5 | |||||||
| LA 1-1,5 | 360° | 2.5 – 3.0 | 11.0 | 13.5 | 14.8 | 15.6 | 16.3 | 17.4 | 64 | on req. | Pipe 34 | 253-111.75 |
Clamp connection DIN 11850, ground – Material 1.4404 (316L) · ground instead of matt
| Type | Spray angle | Cleaning Ø (m) | Flow rate m³/h at pressure (bar) | DA (mm) | LA (mm) | Connection | Order code | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.0 | 1.5 | 1.8 | 2.0 | 2.2 | 2.5 | |||||||
| A 05-1,0 | 360° | 0.8 – 1.0 | 2.8 | 3.4 | 3.8 | 4.0 | 4.2 | 4.4 | 28 | 46.6 | Pipe 13 | 254-200059 |
| B1 | 192° | 2.0 – 3.0 | 9.5 | 11.6 | 12.7 | 13.4 | 14.1 | 15.0 | 64 | 84 | Pipe 29 | 254-200062 |
Welded connection inch ½" – without 3A · ground
| Type | Spray angle | Cleaning Ø (m) | Flow rate m³/h at pressure (bar) | DA (mm) | LA (mm) | Connection | Order code | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.0 | 1.5 | 1.8 | 2.0 | 2.2 | 2.5 | |||||||
| A 05-1,0 | 360° | 0.8 – 1.0 | 2.4 | 2.9 | 3.2 | 3.4 | 3.6 | 3.8 | on req. | on req. | ½" (12.7) | 253-114.36 |
on req. = on request. Recommended operating pressure 1.0 to 2.5 bar g at the spray ball inlet. Guide value for cleaning liquid: 30 to 50 l/min per metre of tank circumference.
The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status: 03.10.2026)
Replacement spray balls for In-Line Sprayer IS 25
| Order code | Designation | Material | Certificate |
|---|---|---|---|
| 254-000289 | IS/kpl D30/B0.6 4e 1.4435 | 1.4435 | |
| 254-000221 | IS/kpl D30/B0.8 4e 1.4435 | 1.4435 | |
| 254-000897 | IS/kpl D30/B1.0 4e 1.4435 | 1.4435 | |
| 254-200003 | IS/kpl D30/B0.6 2.4602 | Hastelloy C22 (2.4602) | |
| 254-000807 | IS/kpl D30/B0.8 2.4602 3.1 | Hastelloy C22 (2.4602) | 3.1 |
| 254-000835 | IS/kpl D30/B1.0 2.4602 3.1 | Hastelloy C22 (2.4602) | 3.1 |
Retaining clamps (with inspection certificate 3.1)
| Order code | Designation | Ball Ø | Surface | Material |
|---|---|---|---|---|
| 253-107.03 | Retaining clamp 05/M 28 | 28 mm | matt | 1.4310 |
| 253-107.06 | Retaining clamp 05/E 28 | 28 mm | electropolished | 1.4310 |
| 253-107.08 | Retaining clamp 05/M 28 | 28 mm | matt | Hastelloy C4 (2.4610) |
| 253-107.01 | Retaining clamp 1/M 64 | 64 mm | matt | 1.4310 |
| 253-107.04 | Retaining clamp 1/E 64 | 64 mm | electropolished | 1.4310 |
| 253-107.07 | Retaining clamp 1/M 64 | 64 mm | matt | Hastelloy C4 (2.4610) |
| 253-107.02 | Retaining clamp 2/M 93 | 93 mm | matt | 1.4310 |
| 253-107.05 | Retaining clamp 2/E 93 | 93 mm | electropolished | 1.4310 |
R-clips for pin connection (with inspection certificate 3.1)
| Order code | R-clip for pin connection |
|---|---|
| 253-107.09 | R-clip 1" OD 3A · 1.4401 |
| 253-107.11 | R-clip 1½" OD 3A · 1.4401 |
| 253-107.10 | R-clip 2" OD 3A · 1.4401 |
Newsletter
New products, application examples and offers in industrial cleaning technology – a few times a year, straight to your inbox.