Jumbo 6 Jet cleaner

Powerful and fast rotating jet cleaner with 4 long nozzles

liquid driven 360° low pressure jet cleaner
strong jet power with high consumption values
short cleaning time
acid & alkali resistant
available with 2 nozzle diameters

Technical Data

Technical Data	Value
Max. Cleaning Diameter:	11 meters
Spray pattern:	360°
Pressure-range:	4 – 14 bar
Flowrate:	1/4″ 180 – 320 LPM (10.8 – 19.2 m³/h), 3/8″ 310 – 580 LPM (18.6 – 34.8 m³/h))
Insertion Opening:	min. Ø 280 mm
Mounting position:	vertically downwards
Weight:	approx. 5.6KG
Materials:	Stainless steel 316L (1.4404), PTFE
Standard connection:	1.5″ internal thread BSPT
optional connection types:	on demand
Nozzle characteristic:	4 x 1/4″ nozzles, 4 x 3/8″ nozzles
Certificates:	3.1, 2.2, more on demand
max. Operating temperature:	95°C (203°F)
max. ambient temperature:	140°C (284°F), 30 Min.
Operating recommendation:	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Optimal Operation

The pressure range for operating a Jumbo 6 jet cleaner is at 4 – 14 bar at the cleaning nozzle.
With a flow rate of 180 – 580 liters/minute, a cleaning diameter of 10 – 11 meters is achieved.

Dimensions

Product description

The JUMBO 6 has a simple and effective drive system that guarantees long service life and good durability. The external gearbox can be visually inspected for contamination and cleaned. The robust design of the JUMBO 6 allows it to be used in a wide range of industries and container types where effective and powerful cleaning is required.
The JUMBO 6 is powered only by the cleaning fluid by causing a simple turbine inside the JUMBO 6 to rotate. All cleaning liquid exits mainly through the nozzle openings, so minimal energy is used for propulsion.

Rotating and static spray balls can be optimally replaced by a JUMBO 6. The strong spraying power of the JUMBO 6 creates a powerful mechanical cleaning effect in tank sizes up to 11 meters in diameter.

Jumbo 6 - Product selection connection types / variants

Jumbo 6 with 1.5″ BSPT Thread”

Connection	Nozzles	Pipe*	Product code	Materials	Certificates	Article numbers
*corresponds to the max. pipe outer diameter of the pipe on which the machine is to be installed (inch or mm). Split pin versions have approximately 15% higher flow. Recommended standard units with high stock probability are shown in blue.
1.5″ female BSPT	4 x 1/4″	1.5″	Jumbo6-4×14-BSPT	316L/PTFE	3.1, 2.2	4660-4943-110
1.5″ female BSPT	4 x 3/8″	1.5″	Jumbo6-4×38-BSPT	316L/PTFE	3.1, 2.2	4660-4942-000

Accessories

Tank cleaning trolley

Materials:	Stainless Steel 316L (1.4404), PP (PTFE)
Certificates:	3.1, 2.2
Device connection:	1.5″ male BSP
Supply line:	DN50 Threaded connection DIN 11851

Maintenance Package

Jumbo 6 PTFE

4660-4002-888

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 27.10.2023-71427321893-1888948-71042)