Welding adapter

Welding adapter Materials: Stainless steel 316L (1.4404) Certificates: 3.1 Suitable for static or rotating cleaners metal sealing Also available with PTFE seal on request  Designation / Benennung Material / Article Nr. ø D1 ø D2 ø D3 G L1 L2 Welding adapter DN 10-G3/8“ 705-138 18 13 10 G 3/8“ 20 10 Welding adapter DN 15-G1/2“ 705-139 23 19 16 G 1/2“ 25 12 Welding adapter DN 20-G3/4“ 705-137 30 23 20 G 3/4“ 30 15 Welding adapter DN 25-G3/4“ 705-158 32 29 26 G 3/4“ 30 12 Welding adapter DN 25-G1“ 705-136 38 29 26 G 1“ 35 18 Welding adapter DN 40-G11/4“ 705-145 47 41 38 G 11/4“ 40 15 Welding adapter DN 40-G11/2“ 705-135 52 41 38 G 11/2“ 45 20 Welding adapter 3/8“OD-G3/8“ 705-151 18 9,5 7,8 G 3/8“ 20 10 Welding adapter 3/4“OD-G1/2“ 705-148 23 19 15,8 G 1/2“ 25 12 Welding adapter

Installation Lance

Installation Lance for Cleaners Installation lance suitable for all cleaning nozzles hygienic design in stainless steel customizable liquid and tank connection with or without liquid sensor SMW 100 adjustable insertion length Suitable for: Orbital cleaners, Jet cleaners, Rotating Nozzles and Sprayballs Materials: Stainless Steel 316L (1.4404), EPDM, FKM Device Connection: see table below Fluid Attachment: see table below (Druckanschluss) Tank Attachment: see table below Insertion Lenght: 100 - 1500 mm, (others) Certificates: FDA, 3.1, 2.2 Options: Preparaton for Sensor SMW100 Options: Handpolish Weight: on Demand The installation lance is available as a complete system including cleaning machine and optionally with liquid sensor SMW 100. The liquid connection as well as the container flange can be equipped in almost all conventional standards, the length of the lance can be adjusted to the desired specifications. By equipping it with an SMW 100 liquid sensor, it


Stand Practical stand for Putting in tanks hygienic feet made of PP or PTFE ideal for orbital cleaners and jet cleaners customizable connectors ideal for horizontal, long tanks robust and durable design Suitable for: Orbital cleaners, Jet cleaners and Rotating Nozzles Materials Cleaning Trolley: Stainless Steel 316L (1.4404) Materials Feed: PP (FDA-conform), optional PTFE Fluid-connection: DN50 Gewindestutzen DIN 11851 Certifictaes: FDA, 3.1, 2.2 Connection Cleaning Nozzle: 1,5" external thread BSP Optional available: Reducing Nipple to 1" and 3/4" (and others) Options: Handpolished Weight: approx. 5 - 12 KG, depending on Model The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All data are without guarantee. (Status of: 26.10.2022-71427321893-1888948-71042)

SMW 100 Sensor

SMW 100 Monitoring sensor Sensor for monitoring liquid surges in tank interiors FDA / EHEDG compliant Monitoring of orbital cleaners and rotary nozzles high process reliability highest hygiene standard extensive evaluation options acid, alkali and temperature resistant Wetted components made of PEEK easy retrofitting for existing cleaners Operating Pressure: max. 10 bar Materials: 1.4305, PEEK Supply voltage: 18...32 VDC PNP On power requirement: < 20 mA Output signal active: max. 50 mA PNP Switch-on delay: ≤ 0,3 s Response time: < 75 ms Degree of protection: IP 65/67 Rated temperature: 25°C Ambient temperature: -10...+70°C Operating temperature: 0...100°C CIP-/SIP-Cleaning temperature: 0...150°C, max. 30Min. Purpose: For use in water and water-based cleaning fluids Kinematic viscosity: 1,004x10ˉ6 m2/s Conductance: 0,005 S/m The SMW 100 is a sensor for monitoring rotating cleaning equipment. During operation, the liquid distribution of a cleaning nozzle is continuously checked. A permanent