Sanitor Rotating Nozzle

GEA Breconcherry Sanitor Rotationsdüsen (strahlbildend, langsame Rotation)

Jetforming, slowly rotating and heat-resistant rotating nozzle

  • liquid-powered 360° rotating nozzle
  • strong radiance with low consumption values
  • completely made of stainless steel, no plastics
  • FDA compliant & EX exempt
  • acid, alkali and temperature resistant
  • compact dimensions
  • self-cleaning, hygienic, low-wear
Technical Data Value
Max. cleaning diameter: 4,8 meters
Spray pattern: 360°
Pressure range: 2 – 20 bar
Flow rate: 25 – 92 LPM (1,5 – 5,5 m³/h)
Insertion opening: BSP/NPT min. Ø 32 mm, Splint min. Ø 60 mm
Mounting position: arbitrary, preferrably vertical downwards
Weight: approx. 0,17 KG
Materials: Stainless Steel 316L (1.4404)
Pipe connection: 3/8″ Internal Thread BSP (NPT)
Optional Pipe Connections: 1/2″ Splint
Nozzle characteristics: Ball with slots
Certificates: 3.1, 2.2, ATEX, FDA Regulation (EC) No 1935/2004
Max. operating temperature: 95°C (203°F)
Max. ambient temperature: 140°C (284°F), 30 Min.
Operating recommendation: It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Optimal Operating

The pressure range for operating a Turbo SSB 40 is 2 – 20 bar at the cleaning nozzle.
With a flow rate of 25 – 92 liters/minute, a cleaning diameter of 2 – 4,8 meters is achieved.

The Sanitor is a compact liquid-bearing rotating nozzle consisting of only 3 stainless steel components. From a liquid pressure of at least 2 bar, the stainless steel rotor is lifted by the liquid and slowly begins to rotate. Flat, overlapping jets of liquid are generated through liquid outlet openings. The liquid jets create a strong impact effect, which is favored by the slow rotation. The pure stainless steel construction of the Sanitor makes it extremely temperature-resistant.

The Sanitor is ideally suited as a replacement for fixed spray balls. The sanitor can be driven flexibly in the range of 2 to 20 bar liquid pressure and achieves a cleaning diameter of up to 4.8 meters. Without ball bearings and without plastic components, FDA compliant and suitable for EX zones. The Sanitor is available with a 360° spray pattern and 3/8″ BSP/NPT or 1/2″ split pin mounting.

GEA Breconcherry Sanitor Gewindebefestigung

Threaded Connection

Sanitor standard devices are equipped with a 3/8″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 3/8″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

GEA Breconcherry Sanitor Splintbefestigung

Splint Connection

Sanitor is optionally available with 1/2″ Split pin attachment. The Split pin attachment ensures that the cleaning nozzle is attached without dead space. Split pin versions have an approx. 15% higher flow rate compared to other conection types.

Sanitor Threaded and Splint pin connection

Connection Spraypattern Pipe* Product code Materials Certificates Article number
*corresponds to the maximum pipe OD of the pipe on which the nozzle is to be installed (inches or mm). Split pin versions have approx. 15% higher flow-rates. Recommended standard devices with high storage probability are colored in blue.
3/8″ IG-BSP 360° 3/8″ SANITORAF-360-BSP 316L ATEX+FDA, 3.1 4660-3002-010
3/8″ IG-NPT 360° 3/8″ SANITORAF-360-NPT 316L FDA, 3.1 4660-3003-010
1/2″ Split pin 360° 12,70 SANITORAF-360-PF 316L ATEX+FDA, 3.1 4660-3001-010
3/8″ IG-BSP 360° 3/8″ SANITORHC22-360-BSP Hastelloy C22/2.4602 ATEX+FDA, 3.1 4660-3002-020
3/8″ IG-BSP 360° 3/8″ SANITORHC22-360-NPT Hastelloy C22/2.4602 ATEX+FDA, 3.1
1/2″ Split pin 360° 12,70 SANITORHC22-360-PF Hastelloy C22/2.4602 ATEX+FDA, 3.1

Installation Lance

GEA Breconcherry Turbo SSB Installationslanze

Materials: Stainless Steel 1.4404 (316L), EPDM, FKM
Certificates: 3.1, 2.2
Device Connection: 3/8″ AG-BSP (1/2″ Splint)
Tank Connection: Flange as needed
Sensor: with/without SMW 100

SMW 100 Fluid Control Sensor

GEA Breconcherry SMW100

Materials: 1.4305, PEEK
Connection Type: welding sleeve
Function: Sensor surge is displayed every 20 seconds

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 28.10.2022-71427321893-1888948-71042)