Turbo SSB 40 Rotating Nozzle

GEA Breconcherry Turbo SSB 40 Rotationsdüsen (strahlbildend, langsame Rotation)

Plain bearing nozzle with slow rotation

  • 360° low pressure plain bearing nozzle
  • slow rotation and small amounts of liquid
  • FDA compliant & EX exempt
  • acid, alkali and temperature resistant
  • compact dimensions
  • self-cleaning, hygienic, low-wear
  • high operational reliability
Technical Data Value
Max. cleaning diameter: 3 meters
Spray pattern: 360°
Pressure range: 2 – 5 bar
Flow rate: 35 – 62 LPM (2,1 – 3,7 m³/h)
Insertion opening: BSP/NPT min. Ø 38 mm, Splint min. Ø 57 m
Mounting position: arbitrary, preferrably vertical downwards
Weight: approx. 0,12 KG
Materials: Stainless Steel 316L (1.4404), C.PTFE, PTFE
Pipe connection: 3/8″ Internal Thread BSP (NPT)
Optional Pipe Connections: S1/2″ Splint, DN10 Splint, DN15 Splint, DN20 Splint
Nozzle characteristics: Ball with slots
Certificates: 3.1, 2.2, ATEX, FDA Regulation (EC) No 1935/2004
Max. operating temperature: 95°C (203°F)
Max. ambient temperature: 140°C (284°F), 30 Min.
Operating recommendation: It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Optimal Operation

The pressure range for operating a Turbo SSB 40 is 2 – 5 bar at the cleaning nozzle.

With a flow rate of 35 – 62 liters/minute, a cleaning diameter of 2 – 3 meters is achieved

The Turbo SSB 40 is a slowly rotating rotary nozzle. During operation, liquid flowing through it sets the spherical head into a steady braked rotation. In the process, flat jets of liquid with a long range emerge through slots. The slow rotation of the nozzle favours an effective bundled liquid impact with a high impact effect. This achieves a cleaning effect of up to 3 metres in diameter. The Turbo SSB is equipped with an extremely low-wear slide bearing system that is permanently flushed with liquid, thus achieving extremely long service lives. Even brief exposure to steam or compressed air does not cause any damage. Mostly, even after years of permanent use in a wide variety of industrial applications, no operational failures caused by wear have been detected.

The nozzle can be easily cleaned of solids by means of a removable ball head. The Turbo SSB meets the highest hygiene standards as well as FDA requirements and is suitable for use in potentially explosive atmospheres. Turbo SSB are available in 3 sizes and many connection types. Common applications for Turbo SSB 40 rotary nozzles are found in the dairy, food, beverage, pharmaceutical and chemical industries for cleaning production, process or transport containers. We recommend installing a 500 micron filter/screen in the CIP supply line close to the nozzle to protect it from clogging or damage by particles.

GEA Breconcherry Turbo SSB 40 Gewindebefestigung

Threaded Connection

Turbo SSB 40 standard devices are equipped with a 3/8″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 3/8″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

GEA Breconcherry Turbo SSB 40 Splintbefestigung

Splint Connection

The Turbo SSB 40 is optionally available with 1/2″, DN10, DN15 or DN20 Split pin attachment. The Split pin attachment ensures that the cleaning nozzle is attached without dead space. Split pin versions have an approx. 15% higher flow rate compared to other conection types.

Turbo SSB 40 Threaded and Splint pin connection

Connection Spraypattern Pipe* Product code Materials Certificates Article number
*corresponds to the maximum pipe OD of the pipe on which the nozzle is to be installed (inches or mm). Split pin versions have approx. 15% higher flow-rates. Recommended standard devices with high storage probability are colored in blue.
3/8″ IG-BSP 360° 3/8″ TSSB40AF-360-BSP 316L/C.PTFE ATEX+FDA, 3.1 4660-2556-113
3/8″ IG-BSP 360° 3/8″ TSSB40F-360-BSP 316L/PTFE FDA, 3.1 4660-2555-112
3/8″ IG-NPT 360° 3/8″ TSSB40AF-360-NPT 316L/C.PTFE ATEX+FDA, 3.1 4660-2558-213
3/8″ IG-NPT 360° 3/8″ TSSB40F-360-NPT 316L/PTFE FDA, 3.1 4660-2558-212
1/2″ Split pin 360° 12,70″ TSSB40AF-360-PF 316L/C.PTFE ATEX+FDA, 3.1 4660-2557-413
1/2″ Split pin 360° 12,70″ TSSB40F-360-PF 316L/PTFE FDA, 3.1 4660-2557-412
DN10 Split pin 360° 13,00 TSSB40AF-360-DN10 316L/C.PTFE ATEX+FDA, 3.1 4660-2557-415
DN10 Split pin 360° 13,00 TSSB40F-360-DN10 316L/PTFE FDA, 3.1
DN15 Split pin 360° 19,00 TSSB40AF-360-DN15 316L/C.PTFE ATEX+FDA, 3.1 4660-2557-419
DN15 Split pin 360° 19,00 TSSB40F-360-DN15 316L/PTFE FDA, 3.1 4660-2561-419
DN20 Split pin 360° 23,00 TSSB40AF-360-DN20 316L/C.PTFE ATEX+FDA, 3.1
DN20 Split pin 360° 23,00 TSSB40F-360-DN20 316L/PTFE FDA, 3.1

Installation Lance

GEA Breconcherry Turbo SSB Installationslanze

Materials: Stainless Steel 1.4404 (316L), EPDM, FKM
Certificates: 3.1, 2.2
Device Connection: 3/8″ AG-BSP (1/2″ Splint)
Tank Connection: Flange as needed
Sensor: with/without SMW 100

SMW 100 Fluid Control Sensor

GEA Breconcherry SMW100

Materials: 1.4305, PEEK
Connection Type: welding sleeve
Function: Sensor surge is displayed every 20 seconds

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 27.10.2022-71427321893-1888948-71042)