Sprayballs threaded connection

Sprühkugel mit Gewindeanschluss © Breconcherry GmbH

Extensive range with high quality workmanship

  • 0.8 to 8.0 metre cleaning diameter
  • 7 different spray pattern types available
  • suitable for use in FDA & EX environments
  • acid, alkali & temperature resistant
  • 3 different ball sizes available
  • inexpensive to purchase, reliable operation
  • reasonable selection of high quality materials
Technical Data Value
Max. cleaning diameter: 8 meters
Spraypattern: 360°, 188°, 192°, 194°, 206°, 232°, 246°
Pressure Range: 1,0 – 2,5 bar
Flowrate: 40 – 1085 LPM (2,4 – 65,1 m³/h)
Insertion opening: 30 mm bis 95 mm
Mounting position: arbitrary
Materials: Stainless Steel 316L (1.4404)
Standard Connection: 1/4″, 1″, 2″ DIN ISO 228-1 IG
Surface: matte
Nozzle Chracteristics: Static Ball with Drillings
Certificates: 3.1 DIN EN 10204, 2.2
Operating recommendation It is recommended to install a filter/screen (500 μm) in the CIP inlet line to the tank cleaner to protect it from clogging with particles or damage

Thanks to high liquid volumes, fixed Sprayballs enable thorough cleaning even at low pressure. The cleaning effect is achieved by bombarding and rinsing the inner walls of the container. By adding suitable cleaning agents, the cleaning effect can be improved, thus shortening the cleaning time.

Two working methods are possible:
– permanent flushing
– pulse-pause operation

Pulse-pause operation reduces the amount of cleaning fluid for the same cleaning time compared to permanent blasting. This allows the cleaning medium used to unfold its effect.

GEA Breconcherry Sprühkugel Spritzmuster Typ A/LA

Typ A/LA 360°,
standing and
lying Tanks

GEA Breconcherry Sprühkugel Spritzmuster Typ B

Typ B 192°-194°,
faced downwards

GEA Breconcherry Sprühkugel Spritzmuster Typ G

Typ G 206°-246°,
faced upwards

GEA Breconcherry Sprühkugel Spritzmuster Typ L

Typ L 188°,
faced upwards,
layingTanks

Pipe-types

(DIN 11866 A-Series
for Pipe outward dimensions)
DIN 11866 B-Series
DIN EN ISO 1127
DIN 11866 C-Series
ASME-BPE 2005
DR: Outer pipe dimensions
s: Sprayball Wall thickness
DN DR (mm) s (mm) DN/OD DR (mm) s (mm) DN DR s (mm)
10 13 1,5 13,5 13,5 1,6 1/2″ 12,7 1,65
15 19 1,5 17,2 17,2 1,6 3/4″ 19,05 1,65
20 23 1,5 21,3 21,3 1,6
26,9 26,9 1,6
25 29 1,5 33,7 33,7 2,0 1″ 25,4 1,65
40 41 1,5 42,4 42,4 2,0 1 1/2″ 38,1 1,65
50 53 1,5 48,3 48,3 2,0 2″ 50,8 1,65
GEA Breconcherry Sprühkugel Splintanschluss Zeichnung Abmessungen

Drilling dimensions

Typ 05 Typ 1 Typ 2
316L (1.4404) 316L (1.4435) Alloy 59 (2.4605) 316L (1.4404) 316L (1.4435) Alloy 59 (2.4605) 316L (1.4404)
Ø DR 12
mm
13
mm
1/2″ OD
mm
13,5
mm
1/2″ OD
mm
29
mm
1″ OD
mm
29
mm
33,7
mm
33,7
mm
53
mm
2″ OD
mm
Ø D 28 28 28 28 28 64 64 64 64 64 93 93
H 46,6 46,6 46,6 46,6 46,6 84 84 84 84 84 113,5 113,5
b+a 18 18 16 18 18 20 20 20 16,5 16,5 30 30
a 10 10 8 10 10 10 10 10 6 6 10 10
b 8 8 8 8 8 10 10 10 10,5 10,5 20 20
Drilling from Underside Pipe
b-0,2 7,8 7,8 7,8 7,8 7,8 9,8 9,8 9,8 10,3 10,3 19,8 19,8
Type Spray
angle
Cleaning Range Ø m 1,0 bar m³/h 1,5 bar m³/h 1,8 bar m³/h 2,0 bar m³/h 2,2 bar m³/h 2,5 bar m³/h D mm H mm Pipe
DIN ISO 228-1
Order-Code
Flow rate with electropolished spray balls approx. 15 – 20% higher than indicated in the table. Recommended operating pressure 1.0 to 2.5 bar at the inlet of the spray ball. The guideline value for cleaning fluid per metre of tank circumference is 30 to 50 l/min.
A05 360° 1,0-2,0 4,7 5,8 6,3 6,6 7,0 7,4 28 25 G1/4″ G-253-106.01
A05-1,0 360° 0,8-1,5 2,4 2,9 3,2 3,4 3,6 3,8 28 25 G1/4″ G-253-106.26
A1-1,0 360° 1,5-2,5 2,5 3,1 3,4 3,5 3,7 4,0 64 84 G1″ G-253-106.34
A1-1,5 360° 1,8-3,0 6,5 8,0 8,7 9,2 9,6 10,3 64 84 G1″ G-253-106.35
A1 360° 2,0-3,0 9,4 11,5< /td> 12,6 13,3 13,9 14,9 64 84 G1″ G-253-106.10
A1-1 360° 2,5-3,5 12,3 15,1 16,5 17,4 18,2 19,4 64 84 G1″ G-253-106.11
A1-2 360° 3,0-4,0 14,8 18,1 19,9 20,9 22,0 23,4 64 84 G1″ G-253-106.12
A2 360° 3,5-5,0 20,9 25,6 28,0 29,6 31,0 33,0 93 113,5 G2″ G-253-106.36
A2-1 360° 4,0-6,0 27,3 33,4 36,6 38,6 40,5 43,2 93 113,5 G2″ G-253-106.37
A2-2 360° 5,0-7,0 34,6 42,4 46,4 48,9 51,3 54,7 93 113,5 G2″ G-253-106.38
A2-3 360° 6,0-8,0 39,9 48,9 53,5 56,4 59,2 63,1 93 113,5 G2″ G-253-106.33
B05 192° 1,0-2,0 2,5 3,1 3,4 3,5 3,7 4,0 28 25 G1/4″ G-253-106.02
B1 192° 2,0-3,0 9,0 11,0 12,1 12,7 13,3 14,2 64 84 G1″ G-253-106.13
B2 194° 3,5-5,0 21,4 26,2 28,7 30,3 31,7 33,8 93 113,5 G2″ G-253-106.39
B2-3 194° 6,0-8,0 41,2 50,5 55,3 58,3 61,1 65,1 93 113,5 G2″ G-253-106.42
G05 232° 1,0-2,0 4,2 5,1 5,6 5,9 6,2 6,6 28 25 G1/4″ G-253-106.22
G1 206° 2,0-3,0 8,7 10,7 11,7 12,3 12,9 13,8 64 84 G1″ G-253-106.19
G1-1 206° 2,5-3,5 10,7 13,1 14,4 15,1 15,9 16,9 64 84 G1″ G-253-106.20
G1-2 206° 3,0-4,0 14,0 17,1 18,8 19,8 20,8 22,1 64 84 G1″ G-253-106.21
G2 246° 3,5
-5,0
19,1 23,4 25,6 27,0 28,3 30,2 93 113,5 G2″ G-253-106.47
G2-1 246° 4,0-6,0 25,8 31,6 34,6 36,5 38,3 40,8 93 113,5 G2″ G-253-106.48
G2-2 246° 5,0-7,0 33,7 41,3 45,2 47,7 50,0 53,3 93 113,5 G2″ G-253-106.49
G2-3 246° 6,0-8,0 40,0 49,0 53,7 56,6 599,3 53,3 93 113,5 G2″ G-253-106.50
L1 188° 2,5-3,0 8,1 9,9 10,9 11,5 12,0 12,8 64 84 G1″ G-253-106.73
LA1-1,5 360° 2,5-3,0 10,5 12,9 14,1 14,8 15,6 16,6 64 84 G1″ G-253-106.77

Installation Lance

blank

Materials: Stainless Steel 1.4404 (316L), EPDM, FKM
Certificate: 3.1, 2.2
Device Connection: see Table
Tank connection: Flange on demand
Sensor: without SMW 100

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 31.10.2023-71427321893-1888948-71042)