Highpressure Lance HL-E with electric motor

blank

Effective high-pressure IBC and container cleaning with electric motor

  • 360° and 270° spray head possible
  • strong jet power with low consumption values
  • working pressure 70-250 bar
  • operation with commercially available high-pressure cleaners
  • compact dimensions, easy to handle
  • hygienic and low-wear application
Technical Data Value
Max cleaning parameter: 2 meter
Spray pattern: 360° / 270° orbital
Number of Nozzles: 2,3 or 4 Nozzles
Nozzle Types: 0° spot jet, optional 5/15° flat jet nozzle
Pressure range: 70 – 250 bar
Flow rate: 30 – 200 LPM (1,8 – 12 m³/h)
Max. operating temperature: 150° Celsius
Insertion opening: 38 – 78 mm, depending on nozzle type
Rotating Speed: 11 / 17 / 24 / 33 t/min
Power Type: a230 / 115 / 48 / 24 VAC oder 24 VDC
Shaft length: 200 – 4000 mm, Special lenghts on request
Mounting position: arbitrary
Weight: 5 – 20 KG, depending on shaft length
Materials: Stainless Steel 316L 304, 301, Viton, (EPDM/PTFE) more on request
Standard Pipe connection: 3/8″ AG, Optional M22x1,5 AG
Nozzle thread: 1/8″, M6, M4, depending on device
Certificates: 2.2, CE, ATEX, FDA on request
Ex version: possible only with HL-A and HL-H
Noise level: Not measurable, measured at the drive

High-pressure cleaners operate with a three-dimensionally rotating spray head, driven by an electric, compressed air or water-hydraulic motor. An orbital motion of both rotational axes forms a 360-degree spray pattern.

The use of these devices is simple, these pressure washers can be connected to almost any standard high-pressure unit and stationary high-pressure pump. The shaft length of a device can be designed between 140 mm and 4000 mm, depending on the needs.
Compressed-air and water-hydraulically driven variants are suitable for use in EX zones, and many of the unit types offered are FDA-compliant.
An extensive range of accessories is offered for handling and installation.

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All data are without guarantee. (Stand: 26.12.2022-71427321893-1888948-71042)