Sprayballs with threaded connection

Sprayballs with threaded connection Extensive range with high quality workmanship 0.8 to 8.0 metre cleaning diameter 7 different spray pattern types available suitable for use in FDA & EX environments acid, alkali & temperature resistant 3 different ball sizes available inexpensive to purchase, reliable operation reasonable selection of high quality materials Technical Data Value Max. cleaning diameter: 8 meters Spraypattern: 360°, 188°, 192°, 194°, 206°, 232°, 246° Pressure Range: 1,0 - 2,5 bar Flowrate: 40 – 1085 LPM (2,4 – 65,1 m³/h) Insertion opening: 30 mm bis 95 mm Mounting position: arbitrary Materials: Stainless Steel 316L (1.4404) Standard Connection: 1/4″, 1″, 2″ DIN ISO 228-1 IG Surface: matte Nozzle Chracteristics: Static Ball with Drillings Certificates: 3.1 DIN EN 10204, 2.2 Operating recommendation It is recommended to install a filter/screen (500 μm) in the CIP inlet line to the tank cleaner to protect it from clogging with particles or damage

Stainless steel spray ball with split pin connection

Stainless steel Spray Ball with Split pin connection Extensive range with high quality workmanship 0.8 to 8.0 metre cleaning diameter 7 different spray pattern types available suitable for use in FDA & EX environments acid, alkali & temperature resistant 3 different ball sizes available inexpensive to purchase, reliable operation reasonable selection of high quality materials Technical Data Value Max. cleaning diameter: 8 meters Spraypattern: 360°, 188°, 192°, 194°, 206°, 232°, 246° Pressure Range: 1,0 - 2,5 bar Flowrate: 7 - 1112 LPM (2,8 - 66,7 m³/h) Insertion opening: 30 mm bis 95 mm Mounting position: arbitrary Materials: Edelstahl 316L (1.4404) Standard Connection: 1/2", 1", 2" Inch Clamp Connection, DIN 11850 Surface: polished, Ra<=0,8 μm at Inch, matte at DIN 11850 Nozzle Chracteristics: Static Ball with Drillings Certificates: 3.1 DIN EN 10204, 2.2 Operating recommendation It is recommended to install a filter/screen (500 μm) in the CIP inlet line to

Sprayballs Special materials (Stainless Steel)

Sprayballs - Special Materials Sprayballs of Stainless Steel Extensive range with high quality workmanship 0.8 to 3.0 meter cleaning diameter 360° spray pattern type available suitable for use in FDA & EX environments acid, alkali & temperature resistant 2 different ball sizes available inexpensive to purchase, reliable operation reasonable choice of high quality materials Technical Data Value Max. cleaning diameter: 3 meters Spraypattern: 360° Pressure Range: 1,0 - 2,5 bar Flowrate: 40 - 290 LPM (2,4 - 17,4 m³/h) Insertion opening: 30 mm bis 60 mm Mounting position: arbitrary Materials: Stainless Steel 316L (1.4435), Alloy 59 (2.4605), Hastelloy C22 (2.4602), (1.4539) Standard Connection: See table Surface: E-polished, outside Ra<=0,5 μm, matte at DIN ISO Certificates: 2.2 DIN EN10204, others on demand Nozzle Chracteristics: 3.1 DIN EN 10204, 2.2 Operating recommendation It is recommended to install a filter/screen (500 μm) in the CIP inlet line to the tank cleaner to

Fury TWB HP Jet-cleaner

Fury TWB HP Jet-cleaner The Fury TWB HP steel cleaner works up to 90 bar effective spray strength low flow rates fast, effective cleaning protection against damage energy saving drive technology also available as Fury TWB version Technical Data Value Max. cleaning diameter: 10 meters Spraypattern: 360°, optionally 180° Pressure Range: 20 – 90 bar Flowrate: 35 – 70 LPM (2,1 – 4,2 m³/h) Insertion opening: min. Ø 200/120 mm (depending on protective cage) Mounting position: vertical Weight: approx. 4,4 KG Materials: Stainless Steel 316 (1.4401), 316L (1.4404), C.PTFE, PTFE, C.PEEK, PEEK, Nitril, Viton, Kalrez Connection types: 3/4″ female thread BSP/NPT Optional Connections: on demand Nozzle configuration: 3 x 2 mm Nozzles Certificates: on demand Max. operating temperature: 120°C (248°F) max. ambient temperature 140°C (284°F), 30 Min. Operating recommendation It is recommended to install a filter/screen (500 μm) in the CIP inlet line to the tank cleaner to protect

Fury TWB Jet-cleaner

Fury TWB Jet-cleaner The Fury TWB is a powerful tank cleaner and works up to 25 bar effective spray strength low flow rates fast, effective cleaning protection against damage energy saving drive technology also available as Fury TWB HP version Technical Data Value Max. cleaning diameter: 16 meters Spraypattern: 360°, optionally 180° Pressure Range: 5 – 25 bar Flowrate: 23 – 105 LPM (1,4 – 6,3 m³/h) Insertion opening: min. Ø 200/120 mm (depending on protective cage) Mounting position: vertical Weight: approx. 4,4 KG Materials: Stainless Steel 316 (1.4401), 316L (1.4404), C.PTFE, PTFE, C.PEEK, PEEK, Nitril, Viton, Kalrez Connection types: 3/4″ female thread BSP/NPT Nozzle configuration: 3 x 2 mm, 3 x 3 mm, 3 x 4 mm Nozzles Certificates: on demand Max. operating temperature: 120°C (248°F) max. ambient temperature 140°C (284°F), 30 Min. Operating recommendation It is recommended to install a filter/screen (500 μm) in the CIP inlet

Fury 600 Jet-cleaner

Fury 600 Jet-cleaner The Fury 600 Jet-cleaner impresses with high flow rates proven in use high flow rates short cleaning times also available as FURY 400 variant different spray patterns available very easy to maintain drive Technical Data Value Max. cleaning diameter: 26 meters Spraypattern: 360° and 180° up-, downwards Pressure Range: 4 – 12 bar Flowrate: 250 – 600 LPM (15,0 – 36,0 m³/h) Insertion opening: min. Ø 480/200 mm (depends on the nozzle) Mounting position: vertical Weight: approx. 10 KG Materials: Stainless Steel 316 (1.4401), 316L (1.4404), C.PTFE, PTFE, C.PEEK, PEEK, Nitril, Viton, Kalrez Connection types: 1″ female thread BSP/NPT Nozzle configuration: 2 x 8 mm, 2 x 10 mm, 4 x 8 mm, 4 x 10 mm Nozzles Certificates: on demand Max. operating temperature: 120°C (248°F) max. ambient temperature 140°C (284°F), 30 Min. Operating recommendation It is recommended to install a filter/screen (500 μm) in the

Fury 400 Jet-cleaner

Fury 400 Jet-cleaner The Fury 400 is suitable for 360° and 180° cleaning proven in use low flow rates short cleaning times also available as FURY 600 variant different spray patterns available very easy to maintain drive Technical Data Value Max. cleaning diameter: 17 meters Spraypattern: 360° und 180° up-, downwards Pressure Range: 4 – 12 bar Flowrate: 50 – 200 LPM (3,0 – 12,0 m³/h) Insertion opening: min. Ø 225/140 mm (depends on the nozzle) Mounting position: vertical Weight: approx. 2,3 KG Materials: Stainless Steel 316 (1.4401), 316L (1.4404), C.PTFE, PTFE, C.PEEK, PEEK, Nitril, Viton, Kalrez Connection types: 1″ female thread BSP/NPT Nozzle configuration: 2 x 4,5 mm, 2 x 6,5 mm, 4 x 4,5 mm, 4 x 6,5 mm Düsen Certificates on demand Max. operating temperature: 120°C (248°F) max. ambient temperature 140°C (284°F), 30 Min. Operating recommendation It is recommended to install a filter/screen (500 μm) in

High-Pressure Lance HL-H with water engine

High-Pressure Lance HL-H with water engine Effecive High-Pressure IBC- and container cleaner with water engine 360° and 270° spray head possible strong jet power with low consumption values working pressure 180 - 200 bar operation with commercially available high-pressure cleaners compact dimensions, easy to handle hygienic and low-wear application Technical Data Value Max cleaning parameter: 2 meter Spray pattern: 360° / 270° orbital Number of Nozzles: 2,3 or 4 Nozzles Nozzle Types: 0° spot jet, optional 5/15° flat jet nozzle Pressure range: 180 - 200 bar Flow rate: 30 – 80 LPM (1,8 – 4,8 m³/h) Max. operating temperature: 90° Celsius Insertion opening: 38 - 78 mm, depending on nozzle type Rotating Speed: 10 - 30 t/min, adjustable Noise Emission: not measureable, measured at the motor Shaft length: 200 - 4000 mm, Special lenghts on request Mounting position: arbitrary Weight: 5 - 20 KG, depending on shaft length Materials:

High Pressure Lance HL-A with Air pressure Motor

High-Pressure Lance HL-A with Air-pressure-Motor Effective high-pressure IBC and container cleaning with air motor 360° and 270° spray head possible strong jet power with low consumption values working pressure 70-250 bar Operation with commercially available high pressure cleaners compact dimensions, easy to handle hygienic and low-wear application Technical Data Value Max cleaning parameter: 2 meter Spray pattern: 360° / 270° orbital Number of Nozzles: 2,3 or 4 Nozzles Nozzle Types: 0° spot jet, optional 5/15° flat jet nozzle Pressure range: 70 - 250 bar Flow rate: 30 – 200 LPM (1,8 – 12 m³/h) Max. operating temperature: 150° Celsius Insertion opening: 38 - 78 mm, depending on nozzle type Rotating Speed: 10 - 20 t/min, adjustable Shaft Lenght: 200 - 4000 mm, Special lengths on request Mounting position: arbitrary Weight: 5 - 20 KG, depending on shaft length Materials: Stainless Steel 316L 304, 301, Viton, (EPDM/PTFE) more on request

Highpressure Lance HL-E with electric motor

Highpressure Lance HL-E with electric motor Effective high-pressure IBC and container cleaning with electric motor 360° and 270° spray head possible strong jet power with low consumption values working pressure 70-250 bar operation with commercially available high-pressure cleaners compact dimensions, easy to handle hygienic and low-wear application Technical Data Value Max cleaning parameter: 2 meter Spray pattern: 360° / 270° orbital Number of Nozzles: 2,3 or 4 Nozzles Nozzle Types: 0° spot jet, optional 5/15° flat jet nozzle Pressure range: 70 - 250 bar Flow rate: 30 – 200 LPM (1,8 – 12 m³/h) Max. operating temperature: 150° Celsius Insertion opening: 38 - 78 mm, depending on nozzle type Rotating Speed: 11 / 17 / 24 / 33 t/min Power Type: a230 / 115 / 48 / 24 VAC oder 24 VDC Shaft length: 200 - 4000 mm, Special lenghts on request Mounting position: arbitrary Weight: 5 - 20