Static spray balls for industrial cleaning
3 reasons for a spray head
The spray head from Breconcherry Cleaning Systems is simply effective

Spray balls create a consistent and effective cleaning pattern throughout. They wet the tank wall under pressure with water or a chemical cleaner and clean the inside walls of industrial tanks. Spherical spray heads are the optimal solution for the cost-effective on-place cleaning of tanks.

Spray heads can be used in a variety of ways

Due to their flexible design, spray heads can be used in almost all industrial environments. Underground grease traps are large tanks that need to be cleaned from time to time. They can also be used in the brewery industry. Here, the large tanks are cleaned in an almost maintenance-free and ultra-hygienic manner with the appropriately desired nozzle and spray ball configuration.

The 3 most important main arguments for a spray head

– the spray head is particle-free
– the water nozzle is virtually maintenance-free
– the spray balls are hygienically clean

The Breconcherry GmbH spray balls are available in different spray angles and cleaning patterns. We would be happy to advise you on your situation by telephone. Just give us a call: Tel. +49 8654 7783 – 46

Welding adapter

Welding adapter Materials: Stainless steel 316L (1.4404) Certificates: 3.1 Suitable for static or rotating cleaners metal sealing Also available with PTFE seal on request  Designation / Benennung Material / Article Nr. ø D1 ø D2 ø D3 G L1 L2 Welding adapter DN 10-G3/8“ 705-138 18 13 10 G 3/8“ 20 10 Welding adapter DN 15-G1/2“ 705-139 23 19 16 G 1/2“ 25 12 Welding adapter DN 20-G3/4“ 705-137 30 23 20 G 3/4“ 30 15 Welding adapter DN 25-G3/4“ 705-158 32 29 26 G 3/4“ 30 12 Welding adapter DN 25-G1“ 705-136 38 29 26 G 1“ 35 18 Welding adapter DN 40-G11/4“ 705-145 47 41 38 G 11/4“ 40 15 Welding adapter DN 40-G11/2“ 705-135 52 41 38 G 11/2“ 45 20 Welding adapter 3/8“OD-G3/8“ 705-151 18 9,5 7,8 G 3/8“ 20 10 Welding adapter 3/4“OD-G1/2“ 705-148 23 19 15,8 G 1/2“ 25 12 Welding adapter

Sprayballs with threaded connection

Sprayballs with threaded connection Extensive range with high quality workmanship 0.8 to 8.0 metre cleaning diameter 7 different spray pattern types available suitable for use in FDA & EX environments acid, alkali & temperature resistant 3 different ball sizes available inexpensive to purchase, reliable operation reasonable selection of high quality materials Technical Data Value Max. cleaning diameter: 8 meters Spraypattern: 360°, 188°, 192°, 194°, 206°, 232°, 246° Pressure Range: 1,0 - 2,5 bar Flowrate: 40 – 1085 LPM (2,4 – 65,1 m³/h) Insertion opening: 30 mm bis 95 mm Mounting position: arbitrary Materials: Stainless Steel 316L (1.4404) Standard Connection: 1/4″, 1″, 2″ DIN ISO 228-1 IG Surface: matte Nozzle Chracteristics: Static Ball with Drillings Certificates: 3.1 DIN EN 10204, 2.2 Operating recommendation It is recommended to install a filter/screen (500 μm) in the CIP inlet line to the tank cleaner to protect it from clogging with particles or damage

Stainless steel spray ball with split pin connection

Stainless steel Spray Ball with Split pin connection Extensive range with high quality workmanship 0.8 to 8.0 metre cleaning diameter 7 different spray pattern types available suitable for use in FDA & EX environments acid, alkali & temperature resistant 3 different ball sizes available inexpensive to purchase, reliable operation reasonable selection of high quality materials Technical Data Value Max. cleaning diameter: 8 meters Spraypattern: 360°, 188°, 192°, 194°, 206°, 232°, 246° Pressure Range: 1,0 - 2,5 bar Flowrate: 7 - 1112 LPM (2,8 - 66,7 m³/h) Insertion opening: 30 mm bis 95 mm Mounting position: arbitrary Materials: Edelstahl 316L (1.4404) Standard Connection: 1/2", 1", 2" Inch Clamp Connection, DIN 11850 Surface: polished, Ra<=0,8 μm at Inch, matte at DIN 11850 Nozzle Chracteristics: Static Ball with Drillings Certificates: 3.1 DIN EN 10204, 2.2 Operating recommendation It is recommended to install a filter/screen (500 μm) in the CIP inlet line to

Sprayballs Special materials (Stainless Steel)

Sprayballs - Special Materials Sprayballs of Stainless Steel Extensive range with high quality workmanship 0.8 to 3.0 meter cleaning diameter 360° spray pattern type available suitable for use in FDA & EX environments acid, alkali & temperature resistant 2 different ball sizes available inexpensive to purchase, reliable operation reasonable choice of high quality materials Technical Data Value Max. cleaning diameter: 3 meters Spraypattern: 360° Pressure Range: 1,0 - 2,5 bar Flowrate: 40 - 290 LPM (2,4 - 17,4 m³/h) Insertion opening: 30 mm bis 60 mm Mounting position: arbitrary Materials: Stainless Steel 316L (1.4435), Alloy 59 (2.4605), Hastelloy C22 (2.4602), (1.4539) Standard Connection: See table Surface: E-polished, outside Ra<=0,5 μm, matte at DIN ISO Certificates: 2.2 DIN EN10204, others on demand Nozzle Chracteristics: 3.1 DIN EN 10204, 2.2 Operating recommendation It is recommended to install a filter/screen (500 μm) in the CIP inlet line to the tank cleaner to

Installation Lance

Installation Lance for Cleaners Installation lance suitable for all cleaning nozzles hygienic design in stainless steel customizable liquid and tank connection with or without liquid sensor SMW 100 adjustable insertion length Suitable for: Orbital cleaners, Jet cleaners, Rotating Nozzles and Sprayballs Materials: Stainless Steel 316L (1.4404), EPDM, FKM Device Connection: see table below Fluid Attachment: see table below (Druckanschluss) Tank Attachment: see table below Insertion Lenght: 100 - 1500 mm, (others) Certificates: FDA, 3.1, 2.2 Options: Preparaton for Sensor SMW100 Options: Handpolish Weight: on Demand The installation lance is available as a complete system including cleaning machine and optionally with liquid sensor SMW 100. The liquid connection as well as the container flange can be equipped in almost all conventional standards, the length of the lance can be adjusted to the desired specifications. By equipping it with an SMW 100 liquid sensor, it