self-cleaning – Breconcherry Industrielle Reinigungssysteme

IS25 Retractor

brecmer — Sun, 22 Oct 2023 18:28:54 +0000

Retractor IS25

IS25 retractor with static nozzle

for hygiene sensitive applications
numerous installation types
enables savings on cleaning agent
only low pressure required
vacuum resistant up to 0.1 bar abs.
reliable operation and low maintenance
monitoring by proximity switch
self-cleaning and hygienic

Technical Data

Characteristic	Value
max. Cleaning diameter	1,6 meters
Spraypattern	192° – 360°
Pressure Range	1,8 – 2,5 bar
Flowrate	48 – 90 LPM (2,9 – 5,4 m³/h)
Stroke lenght	56 mm
Preferred mounting position	arbitrary
Weight	approx. 6,0 KG
Materials in contact with product	Stainless Steel 316L (1.4435), EPDM, FKM, FFKM
Materials not in contact with product	Stainless Steel 316 (1.4301), NBR
Connections	see order codes
Nozzle characteristics	Sprayball fixed with drill holes
Certificates	3.1, 2.2, ATEX 0G/20D and FDA possible
max. operating temperature	98°C (208°F)
max. steam admission	140°C (284°F), 30 Min.
max. hot air admission	190°C (374°F), 30 Min
Operating recommendation	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Operating Values

Pressure in bar	B 0,6 Flowrate m³/h	B 0,8 Flowrate m³/h
Two spray heads are available: spray head B 06 (all 0.6 mm holes), spray head B 08 (all 0.8 mm holes). optimum operating pressure 1.8 to 2.5 bar.
1,5	2,9	4,2
1,8	3,2	4,6
2,0	3,4	4,8
2,2	3,5	5,1
2,5	3,8	5,4

The advantages of the IS 25 at a glance:

Functionally reliable and validatable
Spring-closing and pneumatic opening
Vacuum resistant up to 0.9 bar
Feedback of both end positions
Feedback via proximity switch holder or feedback head
Seals EPDM, FKM and FFKM Solvent resistant
Can be used in hazardous areas of ATEX zone 0G/20D
Standard material 1.4435/316L
Surfaces CIP and product-contact up to Ra ≤ 0.8 µm

Retractors are extendable cleaning nozzles. By using retractor nozzles, the highest level of safety and hygiene can be achieved. Our selection of retractor nozzles includes devices with spring or compressed air retraction. Nozzle extension in these devices is usually accomplished via fluid pressure. Retractors can be equipped with static spray balls, Chemidisc and Chemitorus series slide bearing nozzles, and high-speed rotating ball bearing nozzles. The position of a retractor nozzle (open/closed) can be checked by means of a magnetic sensor. Our retractors can be adapted to individual needs. Depending on the type of device, FDA conformity as well as EX exemption and stroke lenghts between 50 mm and 1000 mm are possible.

Function

During the cleaning process, the spray head is pneumatically controlled and extended. After the cleaning process, the spray head is returned to its rest position by the strong spring load from the product chamber.

The IS25 has a spray head which is extended for cleaning in containers or pipelines. After the cleaning process, the spray head returns to its rest position and closes flush with the product chamber.
The use of the IS25 considerably reduces cleaning costs, because there is no need for buildup in agitator vessels or flooding of pipelines.
The IS25 is particularly suitable for cleaning tanks with moving internals, such as beam agitators and scrapers.
With the IS25 it is now also possible to clean bulk material pipelines with a minimized quantity, previously only possible with the use of a large quantity of cleaning agent. This considerably reduces energy and investment costs, as the cleaning agent consumption of the IS25 is only approx. 3.4 – 4.8 m³/h at 2 bar.

Application Areas and Cleaning Diameters

IS25 Device Description

Splash-proof connection head to protect the electrical installation (up to IP67).
Very compact and reversible actuator – spring closing / air opening or vice versa. Air support of the spring chamber is possible.
ECOVENT® -E actuators have the possibility of internal airflow.
Due to the open lantern, a defective rod seal and the valve position can be recognized immediately.
Reliable sealing at the valve stem – highest surface quality due to rolled stem surface.
One or two-piece housing.
The metallic stop of the valve disc results in a defined deformation of the seal. This results in a long service life.
Seat ring and guide for the spray head.
Removable spray head
Easy installation and removal by means of a hinged ringSplash-proof connection head to protect the electrical installation (up to IP67).

Installation examples

Pipe- and Container connections

Housing connection IS-T for welding into a Container jacket	Container welding flange T50/40 for welding into tank bottoms or tank shells	Housing connection IS-Roh for welding in pipe from DN 200 to DN 400	Housing connection for VARINLINE® housings DN 80 to DN 150, 4″ OD and 6″ IPS


	Behältereinschweißflansch T50/40

Container welding flange IS-T	Pipe welding flange IS

Retraktor IS25-Product selection / Ordering codes

Retraktor IS25

Code	IS25	D	T	01	0	0	1	K	00	2	0
Position	1	2	3	4	5	6	7	8	9	10	11

Example	Position	Designation	Code-Selection Characteristics
IS25	1	Typ	IS25	IS25 DN25
D	2	Nominal size standard	D	DN 25 DIN (29×1,5 mm)
D	2	Nominal size standard	S	DIN EN ISO (33,7×2,0 mm)
T	3	Housing	L	1-pruned 1.4435
T	3	Housing	T	2-pruned 1.4435
01	4	Sprayball	01	Sprayhead B 0.6
01	4	Sprayball	05	Sprayhead B 0.8
0	5	Pressure Connection per Prune¹	0	Welded end
			NFK	Hygienic-Nutflange, DIN 11864-2, DIN 11853-2
			ASN	Aseptic-flange connection, DIN 11864-2
			ASK	Hygienic-flange connection, DIN 11864-2, DIN 11853-2
			AVK	Hygienic-Screw connection, DIN 11864-1, DIN 11853-2
			AVN	Aseptik-Screw connection, DIN 11864-1
			TN	VARIVENT® Nutflange incl. O-Ring and Connection parts
			TK	VARIVENT® Flange connection, Nutflange on the Housing
0	6	Process connection²	1	Container welded flange T 50/40 1.4404
			3	Container welded flange T 50/40 1.4435
			5	Housing connection for VARILINE® Housing³ (DN80-150/4″-6″ OD/IPS)
			8	anpassbarer Housing connection IS-Roh for Pipes
			2	Housing connection IS-T 1.4435/316L
1	7	Sealing Materials in contact with product	1	EPDM
			2	FKM
			3	FFKM
K	8	Applications	K	EPDM
K	8	Applications	E	VMQ
00	9	Feedback⁴	0	No Feedback
			M	with Initiator admission
			M2	with Initiator admission and 2 Proximity initiators
			M1	with Initiator admission and 1 Proximity initiators
			T	T.VIS® M1 feedback head with 2 feedback signals and 1 pilot valve 24V
			A	ATEX feedback head ECOVENT® with 2 proximity switches 24V and 1 pilot valve 24V
2	10	Surface Quality Housing	2	inside Ra 0,8 μm, outside matte
			3	inside Ra 0,8 μm, outside polished
			4	inside Ra 0,4 μm, outside matte
			8	inside Ra 0,4 μm, outside polished
0	11	Certificates	0	without Certificates
			W	(41) with Factory certificate 2.2 DIN EN10204
			Z	(42) with Material acceptance test certificate 3.1 DIN EN10204

1: only with EPDM-Seal
2: optional: Weld-in device, part number: 254-000271
3: VARINLINE® Housing must be ordered separately
4: further feedback selectable under T.VIS® feedback systems

Optional

Magnetic sensor

Optional magnetic sensor for sensing position open and/or closed

Retractor nozzles Product overview

_	MR1	MR2	IS25	SR1000
Sprayhead	Chemidisc 25/75, Torus	Chemidisc 25/75, Torus	Spray ball (fixed)	Spinner
Container Connection	DN65/2,5	DN65/2,5″	DN80	DN16 to DN200
Extension	Fluid pressure	Fluid pressure	Air Pressure	Fluid pressure
Closure	Spring tension	Airpressure	Spring tension	Spring tension
Lifting lenght	50 – 300 mm	50 – 300 mm	56 mm	50 – 1000 mm
Sensor	open/closed	open/closed	No Sensor	open/closed
Nozzle closure	sealant	sealant	sealant	open
Certificates	ATEX & FDA	ATEX & FDA	FDA	FDA (ATEX)
Application	Pipe cleaning & Cleaning shaded areas	Container cleaning, Pipe cleaning	Pipe cleaning & Cleaning shaded areas	Container cleaning, Pipe cleaning

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All data are without guarantee. (Stand: 26.10.2023-71427321893-1888948-71042)

Turbo SSB 40

brecmer — Sun, 22 Oct 2023 11:02:36 +0000

Turbo SSB 40 Rotating Nozzle

Plain bearing nozzle with slow rotation

360° low pressure plain bearing nozzle
slow rotation and small amounts of liquid
FDA compliant & EX certified
acid, alkali and temperature resistant
compact dimensions
self-cleaning, hygienic, low-wear
high operational reliability

Technical Data

Technical Data	Value
Max. cleaning diameter:	3 meters
Spray pattern:	360°
Pressure range:	2 – 5 bar
Flow rate:	35 – 62 LPM (2,1 – 3,7 m³/h)
Insertion opening:	BSP/NPT min. Ø 38 mm, Splint min. Ø 57 m
Mounting position:	arbitrary, preferrably vertical downwards
Weight:	approx. 0,12 KG
Materials:	Stainless Steel 316L (1.4404), C.PTFE, PTFE
Pipe connection:	3/8″ Internal Thread BSP (NPT)
Optional Pipe Connections:	S1/2″ Splint, DN10 Splint, DN15 Splint, DN20 Splint
Nozzle characteristics:	Ball with slots
Certificates:	3.1, 2.2, ATEX, FDA Regulation (EC) No 1935/2004
Max. operating temperature:	95°C (203°F)
Max. ambient temperature:	140°C (284°F), 30 Min.
Operating recommendation:	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Operating Values

Optimal Operation

The pressure range for operating a Turbo SSB 40 is 2 – 5 bar at the cleaning nozzle.

With a flow rate of 35 – 62 liters/minute, a cleaning diameter of 2 – 3 meters is achieved

Dimensions

Product Description

The Turbo SSB 40 is a slowly rotating rotary nozzle. During operation, liquid flowing through it sets the spherical head into a steady braked rotation. In the process, flat jets of liquid with a long range emerge through slots. The slow rotation of the nozzle favours an effective bundled liquid impact with a high impact effect. This achieves a cleaning effect of up to 3 metres in diameter. The Turbo SSB is equipped with an extremely low-wear slide bearing system that is permanently flushed with liquid, thus achieving extremely long service lives. Even brief exposure to steam or compressed air does not cause any damage. Mostly, even after years of permanent use in a wide variety of industrial applications, no operational failures caused by wear have been detected.

The nozzle can be easily cleaned of solids by means of a removable ball head. The Turbo SSB meets the highest hygiene standards as well as FDA requirements and is suitable for use in potentially explosive atmospheres. Turbo SSB are available in 3 sizes and many connection types. Common applications for Turbo SSB 40 rotary nozzles are found in the dairy, food, beverage, pharmaceutical and chemical industries for cleaning production, process or transport containers. We recommend installing a 500 micron filter/screen in the CIP supply line close to the nozzle to protect it from clogging or damage by particles.

Connection Types

Threaded Connection

Turbo SSB 40 standard devices are equipped with a 3/8″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 3/8″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

Splint Connection

The Turbo SSB 40 is optionally available with 1/2″, DN10, DN15 or DN20 Split pin attachment. The Split pin attachment ensures that the cleaning nozzle is attached without dead space. Split pin versions have an approx. 15% higher flow rate compared to other conection types.

Turbo SSB 40 - Product Selection Connection Types/Variants

Turbo SSB 40 Threaded and Splint pin connection

Connection	Spraypattern	Pipe*	Product code	Materials	Certificates	Article number
*corresponds to the maximum pipe OD of the pipe on which the nozzle is to be installed (inches or mm). Split pin versions have approx. 15% higher flow-rates. Recommended standard devices with high storage probability are colored in blue.
3/8″ IG-BSP	360°	3/8″	TSSB40AF-360-BSP	316L/C.PTFE	ATEX+FDA, 3.1	4660-2556-113
3/8″ IG-BSP	360°	3/8″	TSSB40F-360-BSP	316L/PTFE	FDA, 3.1	4660-2555-112
3/8″ IG-NPT	360°	3/8″	TSSB40AF-360-NPT	316L/C.PTFE	ATEX+FDA, 3.1	4660-2558-213
3/8″ IG-NPT	360°	3/8″	TSSB40F-360-NPT	316L/PTFE	FDA, 3.1	4660-2558-212

1/2″ Split pin	360°	12,70	TSSB40AF-360-PF	316L/C.PTFE	ATEX+FDA, 3.1	4660-2557-413
1/2″ Split pin	360°	12,70	TSSB40F-360-PF	316L/PTFE	FDA, 3.1	4660-2557-412

DN10 Split pin	360°	13,00	TSSB40AF-360-DN10	316L/C.PTFE	ATEX+FDA, 3.1	4660-2557-415
DN10 Split pin	360°	13,00	TSSB40F-360-DN10	316L/PTFE	FDA, 3.1	–

DN15 Split pin	360°	19,00	TSSB40AF-360-DN15	316L/C.PTFE	ATEX+FDA, 3.1	4660-2557-419
DN15 Split pin	360°	19,00	TSSB40F-360-DN15	316L/PTFE	FDA, 3.1	4660-2561-419

DN20 Split pin	360°	23,00	TSSB40AF-360-DN20	316L/C.PTFE	ATEX+FDA, 3.1	–
DN20 Split pin	360°	23,00	TSSB40F-360-DN20	316L/PTFE	FDA, 3.1	–

Accessories

Installation Lance

Materials:	Stainless Steel 1.4404 (316L), EPDM, FKM
Certificates:	3.1, 2.2
Device Connection:	3/8″ AG-BSP (1/2″ Splint)
Tank Connection:	Flange as needed
Sensor:	with/without SMW 100

SMW 100 Fluid Control Sensor

Materials:	1.4305, PEEK
Connection Type:	welding sleeve
Function:	Sensor surge is displayed every 20 seconds

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 27.10.2022-71427321893-1888948-71042)

Turbo SSB 75

brecmer — Sat, 21 Oct 2023 12:27:50 +0000

Turbo SSB 75 Rotating Nozzle

Plain bearing nozzle with slow rotation

360° low pressure plain bearing nozzle
slow rotation and small amounts of liquid
FDA compliant & EX certified
acid, alkali and temperature resistant
compact dimensions
self-cleaning, hygienic, low-wear
high operational reliability

Technical Data

Technical Data	Value
Max. cleaning diameter:	4,7 meters
Spray pattern:	360°
Pressure range:	2 – 10 bar
Flow rate:	60 – 153 LPM (3,6 – 9,2 m³/h)
Insertion opening:	SSB 75 BSP/NPT min. Ø 60 mm, Splint min. Ø 85 mm SSB 75 CS BSP/NPT min. Ø 45 mm, Splint min. Ø 85 mm
Mounting position:	arbitrary, preferrably vertical downwards
Weight:	approx. 0,37 KG
Materials:	Stainless Steel 316L (1.4404), C.PTFE, PTFE
Pipe connection:	3/4″ Internal Thread BSP (NPT)
Optional Pipe Connections:	1″ Splint, DN25 Splint
Nozzle characteristics:	Ball with slots
Certificates:	3.1, 2.2, ATEX, FDA Regulation (EC) No 1935/2004
Max. operating temperature:	95°C (203°F)
Max. ambient temperature:	140°C (284°F), 30 Min.
Operating recommendation:	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Operating values

Optimal Operation

The pressure range for operating a Turbo SSB 75 is 2 – 10 bar at the cleaning nozzle.
With a flow rate of 60 – 153 liters/minute, a cleaning diameter of 3 – 4,7 meters is achieved.

Dimensions

Product description

The Turbo SSB 75 is a slowly rotating rotary nozzle. During operation, liquid flowing through it sets the ball head into a steady braked rotation. In the process, flat jets of liquid with a long range emerge through slots. The slow rotation of the nozzle favours an effective bundled liquid impact with a high impact effect. This achieves a cleaning effect of up to 4.7 metres in diameter. The Turbo SSB is equipped with an extremely low-wear slide bearing system that is permanently flushed with liquid, thus achieving extremely long service lives. Even brief exposure to steam or compressed air does not cause any damage. After years of permanent use within a wide variety of industrial applications, no operational failures caused by wear have been detected. The nozzle can be easily cleaned of solids by means of a removable ball head.

The Turbo SSB meets the highest hygiene standards as well as FDA requirements and is suitable for use in potentially explosive atmospheres. The Turbo SSB 75 is available as a CS version without a split pin on the ball head or completely without a split pin. Turbo SSB are available in 3 sizes and many connection types. Common applications for Turbo SSB 75 rotary nozzles are found in the dairy, food, beverage, pharmaceutical and chemical industries for cleaning production, process or transport containers.

We strongly recommend the installation of a 500 micron filter/strainer in the CIP supply line close to the tankwasher
to protect it against particulate blocking or damage.

Connection Types

Threaded Connection

Turbo SSB 75 standard devices are equipped with a 3/4″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 3/4″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

Splint Connection

The Turbo SSB 75 is optionally available with 1″ or DN25 Split pin attachment. The Split pin attachment ensures that the cleaning nozzle is attached without dead space. Split pin versions have an approx. 15% higher flow rate compared to other conection types.

Turbo SSB 75 - Product Selection Connection Types / Variants

Turbo SSB 75 Threaded and Split pin connection

Connection	Spray Pattern	Pipe*	Product code	Materials	Certificates	Article numbers
*corresponds to the maximum pipe OD of the pipe on which the nozzle is to be installed (inches or mm). Split pin versions have approx. 15% higher flow-rates. Recommended standard devices with high storage probability are colored in blue.
3/4″ IG-BSP	360°	3/4″	TSSB75AF-360-BSP	316L/C.PTFE	ATEX+FDA, 3.1	4660-2337-113
3/4″ IG-BSP	360°	3/4″	TSSB75F-360-BSP	316L/PTFE	FDA, 3.1	4660-2336-112
3/4″ IG-NPT	360°	3/4″	TSSB75AF-360-NPT	316L/C.PTFE	ATEX+FDA, 3.1	4660-2341-213
3/4″ IG-NPT	360°	3/4″	TSSB75F-360-NPT	316L/PTFE	FDA, 3.1	4660-2346-212

1″ Split pin	360°	25,40″	TSSB75AF-360-PF	316L/C.PTFE	ATEX+FDA, 3.1	4660-2342-413
1″ Split pin	360°	25,40″	TSSB75F-360-PF	316L/PTFE	FDA, 3.1	4660-2347-412

DN25 Split pin	360°	29,12	TSSB75AF-360-DN25	316L/C.PTFE	ATEX+FDA, 3.1	4660-2558-413
DN25 Split pin	360°	29,12	TSSB75F-360-DN25	316L/PTFE	FDA, 3.1	4660-2558-414

Turbo SSB 75 CS Threaded and Split pin connection

Connection	Spray Pattern	Pipe*	Product code	Materials	Certificates	Article numbers
*corresponds to the maximum pipe OD of the pipe on which the nozzle is to be installed (inches or mm). Split pin versions have approx. 15% higher flow-rates. Recommended standard devices with high storage probability are colored in blue.
3/4″ IG-BSP	360°	3/4″	TSSB75AF-CS360-BSP	316L/C.PTFE	ATEX+FDA, 3.1	4660-2558-421
3/4″ IG-BSP	360°	3/4″	TSSB75F-CS360-BSP	316L/PTFE	FDA, 3.1	4660-2558-418
3/4″ IG-NPT	360°	3/4″	TSSB75AF-CS360-NPT	316L/C.PTFE	ATEX+FDA, 3.1	4660-2558-422
3/4″ IG-NPT	360°	3/4″	TSSB75F-CS360-NPT	316L/PTFE	FDA, 3.1	4660-2558-424

1″ Split pin	360°	25,40	TSSB75AF-CS360-PF	316L/C.PTFE	ATEX+FDA, 3.1	4660-2558-423
1″ Split pin	360°	25,40	TSSB75F-CS360-PF	316L/PTFE	FDA, 3.1	4660-2558-425

DN25 Split pin	360°	29,12	TSSB75AF-CS360-DN25	316L/C.PTFE	ATEX+FDA, 3.1	4660-2558-420
DN25 Split pin	360°	29,12	TSSB75F-CS360-DN25	316L/PTFE	FDA, 3.1	4660-2558-419

Accessories

Installation Lance

Materials:	Stainless Steel 1.4404 (316L), EPDM, FKM
Certificates:	3.1, 2.2
Device Connection:	3/4″ AG-BSP (1″ Splint)
Tank Connection:	Flange as needed
Sensor:	with/without SMW 100

SMW 100 Fluidity Sensor

Materials:	1.4305, PEEK
Connection Type:	Welding Sleeve
Function:	Sensor surge is displayed every 20 seconds

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 27.10.2022-71427321893-1888948-71042)

Turbo SSB 125

brecmer — Fri, 20 Oct 2023 17:18:15 +0000

Turbo SSB 125 Rotating Nozzle

Plain bearing nozzle with slow rotation

360° low pressure plain bearing nozzle
slow rotation and small amounts of liquid
FDA compliant & EX certified
acid, alkali and temperature resistant
compact dimensions
self-cleaning, hygienic, low-wear
high operational reliability

Technical Data

Technical Data	Value
Max. cleaning diameter:	10 meters
Spray pattern:	360°
Pressure range:	2 – 6 bar
Flow rate:	200 – 408 LPM (12,0 – 24,5 m³/h)
Insertion opening:	BSP/NPT min. Ø 85 mm, Splint min. Ø 110 mm
Mounting position:	arbitrary, preferrably vertical downwards
Weight:	approx. 0,74 KG
Materials:	Stainless Steel 316L (1.4404), C.PTFE, PTFE
Pipe connection:	1,25″ Internal Thread BSP (NPT)
Optional Pipe Connections:	1,5″ Splint, DN40 Splint
Nozzle characteristics:	Ball with slots
Certificates:	3.1, 2.2, ATEX, FDA Regulation (EC) No 1935/2004
Max. operating temperature:	95°C (203°F)
Max. ambient temperature:	140°C (284°F), 30 Min.
Operating recommendation:	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Operating Values

Optimal Operating

The pressure range for operating a Turbo SSB 125 is 2 – 6 bar at the cleaning nozzle.
With a flow rate of 200 – 408 liters/minute, a cleaning diameter of 6 – 10 meters is achieved.

Dimensions

Product description

The Turbo SSB 125 is a slowly rotating rotary nozzle. During operation, the liquid flowing through causes the ball head to rotate evenly and with a brake. Flat liquid jets with a long range emerge through slits. The slow rotation of the nozzle favors an effective bundled liquid impact with high impact effect. This achieves a cleaning effect of up to 10 meters in diameter. Turbo SSB are available in 3 sizes and many connection types. Common areas of application for Turbo SSB rotary nozzles can be found in the dairy, food, beverage, pharmaceutical and chemical industries for cleaning production, process or transport containers.

The Turbo SSB is equipped with an extremely low-wear plain bearing system that is permanently immersed in liquid, which means that extremely long service lives can be achieved. Even brief exposure to steam or compressed air does not cause any damage. Even after years of constant use in a wide variety of industrial applications, no operational failures caused by wear and tear have been observed. The nozzle can be easily cleaned of solids by means of a removable ball head. The Turbo SSB meets the highest hygiene standards and the requirements of the FDA and is suitable for use in potentially explosive areas.

Connection Types

Threaded Connection

Turbo SSB 125 standard devices are equipped with a 1,25″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 1,25″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

Splint Connection

The Turbo SSB 125 is optionally available with 1,5″ or DN40 Split pin connection. The Split pin connection ensures that the cleaning nozzle is attached without dead space. Split pin versions have an approx. 15% higher flow rate compared to other conection types.

Turbo SSB 125 - Product Selection Connection Types/Variants

Turbo SSB 125 Threaded and Split pin connection

Connection	Spray Pattern	Pipe*	Product Code	Materials	Certificates	Article number
*corresponds to the maximum pipe OD of the pipe on which the nozzle is to be installed (inches or mm). Split pin versions have approx. 15% higher flow-rates. Recommended standard devices with high storage probability are colored in blue.
1,25″ IG-BSP	360°	1,25″	TSSB125AF-360-BSP	316L/C.PTFE	ATEX+FDA, 3.1	4660-2451-113
1,25″ IG-BSP	360°	1,25″	TSSB125F-360-BSP	316L/PTFE	FDA, 3.1	4660-2448-112
1,25″ IG-NPT	360°	1,25″	TSSB125AF-360-NPT	316L/C.PTFE	ATEX+FDA, 3.1	4660-2558-417
1,25″ IG-BSP	360°	1,25″	TSSB125F-360-NPT	316L/PTFE	FDA, 3.1	4660-2453-212

1,5″ Split pin	360°	38,10	TSSB125AF-360-PF	316L/C.PTFE	ATEX+FDA, 3.1	4660-2452-413
1,5″ Split pin	360°	38,10	TSSB125F-360-PF	316L/PTFE	FDA, 3.1	4660-2454-412

DN40 Split pin	360°	41	TSSB125AF-360-DN40	316L/C.PTFE	ATEX+FDA, 3.1	4660-2558-415
DN40 Split pin	360°	41	TSSB125F-360-DN40	316L/PTFE	FDA, 3.1	4660-2558-416

Accessories

Installation Lance

Materials:	Stainless Steel 1.4404 (316L), EPDM, FKM
Certificates:	3.1, 2.2
Device Connection:	1,25″ AG-BSP (1,5″ Split pin)
Tank Connection:	Flange as needed
Sensor:	with/without SMW 100

SMW 100 Fluid Sensor

Materials:	1.4305, PEEK
Connection Type:	Welding Sleeve
Function:	Sensor surge is displayed every 20 seconds

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 27.10.2023-71427321893-1888948-71042)

Sanitor

brecmer — Thu, 19 Oct 2023 11:10:55 +0000

Sanitor Rotating Nozzle

Jetforming, slowly rotating and heat-resistant rotating nozzle

liquid-powered 360° rotating nozzle
strong radiance with low consumption values
completely made of stainless steel, no plastics
FDA compliant & EX certified
acid, alkali and temperature resistant
compact dimensions
self-cleaning, hygienic, low-wear

Technical Data

Technical Data	Value
Max. cleaning diameter:	4,8 meters
Spray pattern:	360°
Pressure range:	2 – 20 bar
Flow rate:	25 – 92 LPM (1,5 – 5,5 m³/h)
Insertion opening:	BSP/NPT min. Ø 32 mm, Splint min. Ø 60 mm
Mounting position:	arbitrary, preferrably vertical downwards
Weight:	approx. 0,17 KG
Materials:	Stainless Steel 316L (1.4404)
Pipe connection:	3/8″ Internal Thread BSP (NPT)
Optional Pipe Connections:	1/2″ Splint
Nozzle characteristics:	Ball with slots
Certificates:	3.1, 2.2, ATEX, FDA Regulation (EC) No 1935/2004
Max. operating temperature:	95°C (203°F)
Max. ambient temperature:	140°C (284°F), 30 Min.
Operating recommendation:	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Operating values

Optimal Operating

The pressure range for operating a Turbo SSB 40 is 2 – 20 bar at the cleaning nozzle.
With a flow rate of 25 – 92 liters/minute, a cleaning diameter of 2 – 4,8 meters is achieved.

Dimensions

Product description

The Sanitor is a compact liquid-bearing rotating nozzle consisting of only 3 stainless steel components. From a liquid pressure of at least 2 bar, the stainless steel rotor is lifted by the liquid and slowly begins to rotate. Flat, overlapping jets of liquid are generated through liquid outlet openings. The liquid jets create a strong impact effect, which is favored by the slow rotation. The pure stainless steel construction of the Sanitor makes it extremely temperature-resistant.

The Sanitor is ideally suited as a replacement for fixed spray balls. The sanitor can be driven flexibly in the range of 2 to 20 bar liquid pressure and achieves a cleaning diameter of up to 4.8 meters. Without ball bearings and without plastic components, FDA compliant and suitable for EX zones. The Sanitor is available with a 360° spray pattern and 3/8″ BSP/NPT or 1/2″ split pin mounting.

Connection Types

Threaded Connection

Sanitor standard devices are equipped with a 3/8″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 3/8″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

Splint Connection

Sanitor is optionally available with 1/2″ Split pin attachment. The Split pin attachment ensures that the cleaning nozzle is attached without dead space. Split pin versions have an approx. 15% higher flow rate compared to other conection types.

Sanitor - Product Selection Connection Types / Variants

Sanitor Threaded and Splint pin connection

Connection	Spraypattern	Pipe*	Product code	Materials	Certificates	Article number
*corresponds to the maximum pipe OD of the pipe on which the nozzle is to be installed (inches or mm). Split pin versions have approx. 15% higher flow-rates. Recommended standard devices with high storage probability are colored in blue.
3/8″ IG-BSP	360°	3/8″	SANITORAF-360-BSP	316L	ATEX+FDA, 3.1	4660-3002-010
3/8″ IG-NPT	360°	3/8″	SANITORAF-360-NPT	316L	FDA, 3.1	4660-3003-010

1/2″ Split pin	360°	12,70	SANITORAF-360-PF	316L	ATEX+FDA, 3.1	4660-3001-010

3/8″ IG-BSP	360°	3/8″	SANITORHC22-360-BSP	Hastelloy C22/2.4602	ATEX+FDA, 3.1	4660-3002-020
3/8″ IG-BSP	360°	3/8″	SANITORHC22-360-NPT	Hastelloy C22/2.4602	ATEX+FDA, 3.1	–

1/2″ Split pin	360°	12,70	SANITORHC22-360-PF	Hastelloy C22/2.4602	ATEX+FDA, 3.1	–

Accessories

Installation Lance

Materials:	Stainless Steel 1.4404 (316L), EPDM, FKM
Certificates:	3.1, 2.2
Device Connection:	3/8″ AG-BSP (1/2″ Splint)
Tank Connection:	Flange as needed
Sensor:	with/without SMW 100

SMW 100 Fluid Control Sensor

Materials:	1.4305, PEEK
Connection Type:	welding sleeve
Function:	Sensor surge is displayed every 20 seconds

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 28.10.2022-71427321893-1888948-71042)

Troll Ball 2

brecmer — Wed, 18 Oct 2023 12:52:41 +0000

Troll Ball 2″ Rotating Nozzle

Plain bearing, jetforming, slowly rotating rotating nozzle with strong cleaning effect

low pressure plain bearing 360° rotating nozzle
slow radiation with low consumption values
FDA compliant & EX certified
acid, alkali and temperature resistant
compact dimensions
self-cleaning, hygienic, low-wear
high operational reliability

Technical Data

Technical Data	Value
Max. cleaning diameter:	4,5 meters
Spray pattern:	360° and 180° up-, downwards
Pressure range:	3 – 12 bar
Flow rate:	50 – 100 LPM (3,0 – 6,0 m³/h)
Insertion opening:	min. Ø 60 mm
Mounting position:	arbitrary, preferrably vertical downwards
Weight:	approx. 1,1 KG
Materials:	Stainless Steel 316L (1.4404), 316 (1.4401), C.PTFE, PTFE, (PEEK)
Pipe connection:	3/8″ Internal Thread BSP, BSPT (NPT)
Optional Pipe Connections:	1/2″ Splint
Nozzle characteristics:	Ball with slots
Certificates:	3.1, 2.2, ATEX, FDA Regulation (EC) No 1935/2004
Max. operating temperature:	95°C (203°F)
Max. ambient temperature:	140°C (284°F), 30 Min.
Operating recommendation:	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Operating Values

Optimal Operation

The pressure range for operating a Troll Ball 2 is 3 – 12 bar at the cleaning nozzle.
With a flow rate of 50 – 100 liters/minute, a cleaning diameter of 4 – 4,5 meters is achieved.

Dimensions

Spraypattern

Cleaning focus 360°, main effective area horizontal and upwards, developed for standard cleaning applications,
Alternative: FanJet Type B.

Cleaning focus 360°, main effective area horizontal and upwards, designed for installation upside down with effective area upwards,
Alternative: FanJet Type F.

Cleaning focus 180°, main area of action horizontal and downwards, developed for installation in open container types,
Alternative: FanJet Type E.

Cleaning focus 180°, main area of action horizontal and upwards, developed for ceiling cleaning.

Product description

The Troll Ball is a rotating cleaning nozzle whose ball head is equipped with drillholes instead of slots. The ball-bearing-free and wear-resistant drive system generates a slow rotation in which strong, bundled liquid jets with high impact force are formed. The individual jets cover each other, which means that a complete 360° cleaning action is achieved. Troll Balls are also available in 180° variants and with attached flat jet or bundle nozzles to improve coverage or increase the jet strength. Troll Ball rotating nozzles are robust and almost indestructible and can be easily serviced or repaired in the event of a defect. Every component of a Troll Ball is available as a spare part.

The simple and effective drive system of the TROLL BALL 2″ creates a slow and constant rotation.
This process provides continuous cleaning with different cleaning media and a wide temperature range. The TROLL BALL has few moving parts, providing a compact, reliable, and low-maintenance cleaning solution. The TROLL BALL is ideal as a replacement for fixed or rotating spray balls.

The cleaning fluid drives a simple motor that produces constant rotation of the ball head. The entire cleaning liquid flows with effective force through the few holes in the spray ball. The specially developed design of the bores creates a good jet strength with a minimum of liquid. An additional nozzle cleans the body and the inlet nozzles of the container. The high-energy drops provide very effective impact up to 2.25 m (r). This ensures reliable cleaning of containers up to 4.5 m in diameter with just a single nozzle.

The TROLL BALL meets the hygiene and material requirements of the FDA. It can be used in the pharmaceutical, food, biotech, beverage and many other hygiene-conscious industries. The TROLL BALL is available in 180° and 360° upwards and downwards versions. The TROLL BALL is also available as a 2″ FanJet (fan nozzle) and 3″ version.

Connection Types

Threaded Connection

Troll Ball 2 standard devices are equipped with a 3/4″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 3/4″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

Special Variants FJ and AV

Troll Ball 2″ FJ – Fan-Jet Nozzles

For applications where even liquid distribution is more important than high impact. The Troll Ball 2″ with fan-jet nozzles ensures an even and full coverage with cleaning liquid, but the cleaning effect is reduced due to the lack of jet bundling. This Troll Ball was developed for special applications. The device is also available with attached full-jet nozzles.

Troll Ball 2″ AV – Anti-Vibration/Full jet nozzles

The Troll Ball 2″ AV (anti-vibration) was developed for applications in which strong vibrations occur. The Troll Ball 2″ AV has a firmly screwed and secured ball instead of the cotter pin. The attached full jet nozzles increase the cleaning effect by an additional 15%. The AV variant is also available without full jet nozzles. Standard variants are also available without a cotter pin.

Troll Ball 2″ - Product Selection Connection Types / Variants

Troll Ball 2″ BSP Threaded Connection

Connection	Spray pattern	Spray pattern	Product code	Materials	Certificates	Article number
Recommended standard devices with high storage probability are shown in blue.
3/4″ IG-BSP	360° Standard	Typ C	TB2AF-C360-BSP	316L/C.PTFE	FDA, 3.1	4660-2102-113
3/4″ IG-BSP	360° Standard	Typ C	TB2F-C360-BSP	316L/PTFE	FDA, 3.1	4660-2105-112
3/4″ IG-BSP	180° downwards	Typ G	TB2AF-G180-BSP	316L/C.PTFE	FDA, 3.1	4660-2131-110
3/4″ IG-BSP	180° downwards	Typ G	TB2F-G180-BSP	316L/PTFE	FDA, 3.1	4660-2131-112
3/4″ IG-BSP	180° upwards	Typ H	TB2AF-H180-BSP	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-BSP	180° upwards	Typ H	TB2F-H180-BSP	316L/PTFE	FDA, 3.1	–
3/4″ IG-BSP	360° inverted	Typ D	TB2AF-D360-BSP	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-BSP	360° inverted	Typ D	TB2F-D360-BSP	316L/PTFE	FDA, 3.1	–
3/4″ IG-BSP	360° FJ Standard	Typ B	TB2AF-B360-BSP	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-BSP	360° FJ Standard	Typ B	TB2F-B360-BSP	316L/PTFE	FDA, 3.1	4660-2133-113
3/4″ IG-BSP	180° FJ downwards	Typ E	TB2AF-E180-BSP	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-BSP	180° FJ downwards	Typ E	TB2F-E180-BSP	316L/PTFE	FDA, 3.1	–
3/4″ IG-BSP	360° FJ upwards	Typ F	TB2AF-F360-BSP	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-BSP	360° FJ upwards	Typ F	TB2F-F360-BSP	316L/PTFE	FDA, 3.1	–

Troll Ball 2″ NPT Threaded Connection

Connection	Spray pattern	Spray pattern	Product code	Materials	Certificates	Article numbers
Recommended standard devices with high storage probability are shown in blue.
3/4″ IG-NPT	360° Standard	Typ C	TB2AF-C360-NPT	316L/C.PTFE	FDA, 3.1	4660-2104-213
3/4″ IG-NPT	360° Standard	Typ C	TB2F-C360-NPT	316L/PTFE	FDA, 3.1	4660-2104-212
3/4″ IG-NPT	180° downwards	Typ G	TB2AF-G180-NPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-NPT	180° upwards	Typ H	TB2AF-H180-NPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-NPT	180° upwards	Typ H	TB2F-H180-NPT	316L/PTFE	FDA, 3.1	–
3/4″ IG-NPT	360° inverted	Typ D	TB2AF-D360-NPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-NPT	360° inverted	Typ D	TB2F-D360-NPT	316L/PTFE	FDA, 3.1	–
3/4″ IG-NPT	360° FJ Standard	Typ B	TB2AF-B360-NPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-NPT	360° FJ Standard	Typ B	TB2F-B360-NPT	316L/PTFE	FDA, 3.1	–
3/4″ IG-NPT	180° FJ downwards	Typ E	TB2AF-E180-NPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-NPT	180° FJ downwards	Typ E	TB2F-E180-NPT	316L/PTFE	FDA, 3.1	–
3/4″ IG-NPT	180° FJ upwards	Typ F	TB2AF-F360-NPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-NPT	360° FJ upwards	Typ F	TB2F-F360-NPT	316L/PTFE	FDA, 3.1	–

Troll Ball 2″ BSPT Threaded Connection

Connection	Spray pattern	Spray pattern	Product code	Materials	Certificates	Article numbers
Recommended standard devices with high storage probability are shown in blue.
3/4″ IG-BSPT	360° Standard	Typ C	TB2AF-C360-BSPT	316L/C.PTFE	FDA, 3.1	4660-2103-113
3/4″ IG-BSPT	360° Standard	Typ C	TB2F-C360-BSPT	316L/PTFE	FDA, 3.1	4660-2101-999
3/4″ IG-BSPT	180° downwards	Typ G	TB2AF-G180-BSPT	316L/C.PTFE	FDA, 3.1	4660-2131-113
3/4″ IG-BSPT	180° downwards	Typ G	TB2F-G180-BSPT	316L/PTFE	FDA, 3.1	–
3/4″ IG-BSPT	180° upwards	Typ H	TB2AF-H180-BSPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-BSPT	180° upwards	Typ H	TB2F-H180-BSPT	316L/PTFE	FDA, 3.1	–
3/4″ IG-BSPT	360° inverted	Typ D	TB2AF-D360-BSPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-BSPT	360° inverted	Typ D	TB2F-D360-BSPT	316L/PTFE	FDA, 3.1	–
3/4″ IG-BSPT	360° FJ Standard	Typ B	TB2AF-B360-BSPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-BSPT	360° FJ Standard	Typ B	TB2F-B360-BSPT	316L/PTFE	FDA, 3.1	–
3/4″ IG-BSPT	180° FJ downwards	Typ E	TB2AF-E180-BSPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-BSPT	180° FJ downwards	Typ E	TB2F-E180-BSPT	316L/PTFE	FDA, 3.1	–
3/4″ IG-BSPT	360° FJ upwards	Typ F	TB2AF-F360-BSPT	316L/C.PTFE	FDA, 3.1	–
3/4″ IG-BSPT	360° FJ upwards	Typ F	TB2F-F360-BSPT	316L/PTFE	FDA, 3.1	–

Accessories / Maintenance Packages

Installation Lance

Materials:	Stainless Steel 1.4404 (316L), EPDM, FKM
Certificates:	3.1, 2.2
Device Connection:	3/8″ AG-BSP (1/2″ Splint)
Tank Connection:	Flange as needed
Sensor:	with/without SMW 100

SMW 100 Fluid Control Sensor

Materials:	1.4305, PEEK
Connection Type:	welding sleeve
Function:	Sensor surge is displayed every 20 seconds

Maintenance Package PTFE

Consisting of:
#70178 Controller: 4660-6250-020
#70112 Socket: 4660-6210-020
#70364 Seal: 4660-6260-020

Troll Ball 2″ (FDA)
4660-4000-888

Mainteance Package C.PTFE

Consisting of:
#70503 Controller: 4660-6220-030
#70502 Socket: 4660-6210-030
#70504 Seal: 4660-6230-030

Troll Ball 2″ (ATEX)
4660-4000-777

Maintenance Package PEEK

Bestehend aus:
#70178PK Controller: 4660-0561-070
#70112PK Socket: 4660-6210-070
#70364PK Seal: 4660-0535-070

Troll Ball 2″ (FDA)
–

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 28.10.2022-71427321893-1888948-71042)

Troll Ball 3

brecmer — Tue, 17 Oct 2023 13:53:16 +0000

Troll Ball 3″ Rotating Nozzle

Plain bearing, rotating nozzle with slow rotation and a strong cleaning effect

low pressure plain bearing 360° rotating nozzle
slow radiation with low consumption values
FDA compliant & EX certified
acid, alkali and temperature resistant
compact dimensions
self-cleaning, hygienic, low-wear
high operational reliability

Technical Data

Technical Data	Value
Max. cleaning diameter:	7 meters
Spray pattern:	360° and 180° up-, downwards
Pressure range:	3 – 12 bar
Flow rate:	110 – 270 LPM (6,6 – 16,2 m³/h)
Insertion opening:	min. Ø 80 mm
Mounting position:	arbitrary, preferrably vertical downwards
Weight:	approx. 2,3 KG
Materials:	Stainless Steel 316L (1.4404), 316 (1.4401), C.PTFE, PTFE, (PEEK)
Pipe connection:	1,5″ Internal Thread BSP, BSPT (NPT)
Nozzle characteristics:	Ball with slots
Certificates:	3.1, 2.2, FDA Regulation (EC) No 1935/2004
Max. operating temperature:	95°C (203°F)
Max. ambient temperature:	140°C (284°F), 30 Min.
Operating recommendation:	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Operating Values

Optimaler Betrieb

Der Druckbereich für den Betrieb eines Troll Ball 3″ liegt bei 3 – 12 bar an der Reinigungsdüse.
Mit einer Durchflussmenge von 110 – 270 Litern/Minute wird ein Reinigungsdurchmesser von 6 – 7 Metern erreicht.

Dimensions

Spraypatterns

Reinigungsfokus 360°, Hauptwirkungsbereich horizontal und aufwärts, entwickelt für Standard-Reinigungsanwendungen,
Alternative: FanJet Typ B

Reinigungsfokus 360°, Hauptwirkungsbereich horizontal und aufwärts, entwickelt für Installation kopfüber mit Wirkungsbereich nach oben, Alternative: FanJet Typ F

Reinigungsfokus 180°, Hauptwirkungsbereich horizontal und nach unten, entwickelt für eine Installation in offenen Behältertypen, Alternative: FanJet Typ E

Reinigungsfokus 180°, Hauptwirkungsbereich horizontal und nach oben, entwickelt für die Deckenreinigung

Product Description

The simple and effective drive system of the TROLL BALL 3″ creates a slow and constant rotation.
This process provides continuous cleaning with different cleaning media and a wide temperature range. The TROLL BALL has few moving parts, providing a compact, reliable, and low-maintenance cleaning solution. The TROLL BALL is ideal as a replacement for fixed or rotating spray balls.

The cleaning fluid drives a simple motor that produces constant rotation of the ball head. The entire cleaning liquid flows with effective force through the few holes in the spray ball. The specially developed design of the bores creates a good jet strength with a minimum of liquid. An additional nozzle cleans the body and the inlet nozzles of the container. The high-energy drops provide very effective impact up to 3,5 m (r). This ensures reliable cleaning of containers up to 7 m in diameter with just a single nozzle.

Connection Types

Threaded Connection

Troll Ball 3 standard devices are equipped with a 3/4″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 3/4″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

Troll Ball 3″ - Product Selection Connection Types / Variants

Troll Ball 3″ BSP Threaded Connection

Connection	Spraypattern	Spraypattern	Product-Code	Materials	Certificates	Article Number
Recommended standard devices with high storage probability are shown in blue.
1,5″ IG-BSP	360° standard	Type C	TB3AF-C360-BSP	316L/C.PTFE	FDA, 3.1	–
1,5″ IG-BSP	360° standard	Type C	TB3F-C360-BSP	316L/PTFE	FDA, 3.1	–
1,5″ IG-BSP	180° downwards	Type G	TB3AF-G180-BSP	316L/C.PTFE	FDA, 3.1	–
1,5″ IG-BSP	180° downwards	Type G	TB3F-G180-BSP	316L/PTFE	FDA, 3.1	4660-2227-112
1,5″ IG-BSP	180° upwards	Type H	TB3AF-H180-BSP	316L/C.PTFE	FDA, 3.1	–
1,5″ IG-BSP	180° upwards	Type H	TB3F-H180-BSP	316L/PTFE	FDA, 3.1	–
1,5″ IG-BSP	360° inverted	Type D	TB3AF-D360-BSP	316L/C.PTFE	FDA, 3.1	–
1,5″ IG-BSP	360° inverted	Type D	TB3F-D360-BSP	316L/PTFE	FDA, 3.1	–

Troll Ball 3″ NPT Threaded Connection

Connection	Spraypattern	Spraypattern	Product-Code	Materials	Certificates	Article Number
Recommended standard devices with high storage probability are shown in blue.
1,5″ IG-NPT	360° standard	Typ C	TB3AF-C360-NPT	316L/C.PTFE	FDA, 3.1	4660-2223-213
1,5″ IG-NPT	360° standard	Typ C	TB3F-C360-NPT	316L/PTFE	FDA, 3.1	4660-2223-212
1,5″ IG-NPT	180° downwards	Typ G	TB3AF-G180-NPT	316L/C.PTFE	FDA, 3.1	–
1,5″ IG-NPT	180° downwards	Typ G	TB3F-G180-NPT	316L/PTFE	FDA, 3.1	–
1,5″ IG-NPT	180° upwards	Typ H	TB3AF-H180-NPT	316L/C.PTFE	FDA, 3.1	–
1,5″ IG-NPT	180° upwards	Typ H	TB3F-H180-NPT	316L/PTFE	FDA, 3.1	–
1,5″ IG-NPT	360° inverted	Typ D	TB3AF-D360-NPT	316L/C.PTFE	FDA, 3.1	–
1,5″ IG-NPT	360° inverted	Typ D	TB3F-D360-NPT	316L/PTFE	FDA, 3.1	–

Troll Ball 3″ BSPT Gewindeanschluss

Connection	Spraypattern	Spraypattern	Product-Code	Materials	Certificates	Article Number
Recommended standard devices with high storage probability are shown in blue.
1,5″ IG-BSPT	360° standard	Typ C	TB3AF-C360-BSPT	316L/C.PTFE	FDA, 3.1	4660-2222-113
1,5″ IG-BSPT	360° standard	Typ C	TB3F-C360-BSPT	316L/PTFE	FDA, 3.1	4660-2102-999
1,5″ IG-BSPT	180° downwards	Typ G	TB3AF-G180-BSPT	316L/C.PTFE	FDA, 3.1	–
1,5″ IG-BSPT	180° downwards	Typ G	TB3F-G180-BSPT	316L/PTFE	FDA, 3.1	–
1,5″ IG-BSPT	180° upwards	Typ H	TB3AF-H180-BSPT	316L/C.PTFE	FDA, 3.1	–
1,5″ IG-BSPT	180° upwards	Typ H	TB3F-H180-BSPT	316L/PTFE	FDA, 3.1	–
1,5″ IG-BSPT	360° inverted	Typ D	TB3AF-D360-BSPT	316L/C.PTFE	FDA, 3.1	–
1,5″ IG-BSPT	360° inverted	Typ D	TB3F-D360-BSPT	316L/PTFE	FDA, 3.1	–

Accessories

Installation Lance

Materials:	Stainless Steel 1.4404 (316L), EPDM, FKM
Certificates:	3.1, 2.2
Device Connection:	3/8″ AG-BSP (1/2″ Splint)
Tank Connection:	Flange as needed
Sensor:	with/without SMW 100

SMW 100 Fluid Control Sensor

Materials:	1.4305, PEEK
Connection Type:	welding sleeve
Function:	Sensor surge is displayed every 20 seconds

Maintenance packages PTFE

Consisting of:
#70177 Controler: 4660-6240-020
#70115 Socket: 4660-6230-020
#70368 Seal: 4660-6280-020

Troll Ball 3″ (ATEX)
–

Maintenance packages C.PTFE

Consisting of:
#70516 Controler: 4660-6250-030
#70515 Socket: 4660-6240-030
#70517 Seal: 4660-6260-030

Troll Ball 3″ (ATEX)
–

Maintenance packages PEEK

–

Troll Ball 3″ (FDA)
–

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 11.11.2022-71427321893-1888948-71042)

Turbo CW 25/75 EN

brecmer — Fri, 13 Oct 2023 18:54:17 +0000

Turbo CW 25/75 Target cleaner

Target cleaning of an area,
hygienic & self-cleaning

no ball bearings
hygienic & self-cleaning
horizontal & vertical
maintenance-free operation possible
very few single components
optimal for shaded areas
continuous spray strength

Technical Data

Technical Data	Value
Spray characteristics:	CW25 1 m horizontal with 200 mm Ø round spray pattern, CW75 1 m horizontal with 1 m Ø round spray pattern
Spray pattern:	Target oriented
Pressure range:	CW25 2 – 6 bar, CW75 4 – 8 bar
Flow rate:	CW25 40 – 70 LPM (2,4 – 4,2 m³/h), CW75 105 – 150 LPM (6,3 – 9,0 m³/h)
Insertion opening:	CW25 min. Ø 100 mm, CW75 min. Ø 110 mm
Mounting position:	arbitrary
Weight:	on request
Materials:	Stainless Steel 316 (1.4401), 316L (1.4404), C.PTFE, PTFE, EPDM
Standard Pipe connection:	KCW25 1/2” Clamp connection, 2,5” Welded connection, CW75 1” Clamp connection, 3” Welded connection
Optional Pipe connections:	on request
Nozzle characteristics:	CW25 Turbodisc 25 360°, CW75 Turbodisc 75 360°
Certificates:	3.1, 2.2, ATEX, FDA, FDA Regulation (EC) No 1935/2004
Max. operating temperature:	95°C (2003°F)
Max. ambient temperature:	140°C (284°F), 30 Min.
Operation recommendation:	It is recommended to install a filter/screen (500 μm) in the CIP inlet line to the tank cleaner to protect it from clogging with particles or damage.

Operating Values

Turbo CW 25

Pressure bar	Flowrate LPM (m³/h)	Spray radius diameter in meters
2	40 (2,4)	Depending on the distance to the target area and pressure the Turbo CW25 creates a spray radius of 2 – 6 meters
3	50 (3,0)
4	60 (3,6)
5	65 (3,9)
6	70 (4,2)

Turbo CW 75

Pressure bar	Flowrate LPM (m³/h)	Spray radius diameter in meters Distance to target in meters
		1 m	2 m	3 m	4 m
4	105 (6,3)	1,0	1,2	–	–
5	120 (7,2)	1,0	1,5	–	–
6	130 (7,8)	1,0	1,5	1,5	–
7	140 (8,4)	1,2	1,5	1,8	–
8	150 (9,0)	1,2	1,5	1,8	2,0

Measurements

Turbo CW 25

Turbo CW 75

Product description

The TURBO CW25/75 is specially designed for targeted cleaning of hard-to-reach areas. Inside a hopper, a Turbodisc 25/75 creates a forward-emerging spray pattern with high-energy droplets. The cleaning nozzle constantly cleans itself during operation.

The TURBO CW25/75 can be mounted in the vessel on a pipe feeder, or welded directly to the vessel wall. The Turbodisc 25/75 can be easily removed from the hopper at any time, the unit works in any installation position and is very insensitive to contamination. A vertical downward position allows the TURBO CW25/75 to specifically clean conveyors or their sections.

The targeted water jet enables cleaning of agitator parts in horizontal and vertical operation, and can also be welded directly to the tank wall in the correct position without colliding with the agitator. The TURBO CW25/75 can be used for cleaning pipe areas. Likewise, the cleaning of shadow areas in tanks is possible by installing it in a sensible position. The TURBO CW25/75 is a cost effective replacement solution for retractable cleaning nozzles.

Areas of application: Brewing, beverage, dairy processing, food, pharmaceutical, chemical and transportation industries. Flushing or cleaning of problem areas, shadow areas, agitators, struts, corner areas in containers or in conveyor and transport systems.

Spray pattern

Turbo CW 25

Turbo CW 75

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 22.12.2022-71427321893-1888948-71042)

Twister orbital cleaner

brecmer — Sun, 08 Oct 2023 18:10:38 +0000

Twister Orbital Cleaner

Radial and axial rotating target jet cleaner

Compact but powerful 360° Jet cleaner
Liquid-driven 360° low-pressure orbital cleaner
Hygienic and compact design
Pressure range 4 – 10 bar
Cleaning diameter up to 16 m
Flow rate between 45 – 97 lpm
Insertion opening 100 mm
FDA compliant & EX certified
acid, alkali & temperature resistant
Ball bearing free, Self-cleaning
Reproducible cleaning by monitoring of the rotation with sensor SMW 100 or Veri-Clean

Technische Daten

Technical Data	Value
Max. cleaning diameter:	16 Meters
Spray pattern:	360° orbital
Pressure Range::	4 – 10 bar / 58-145 psi
Flowrate:	45 – 97 LPM (2,7 – 5,8 m³/h)
Insertion Opening:	min. Ø 100 mm
Preferred mounting position:	arbitrary, preferrably vertical
Weight:	approx. 2,0 KG
Materials:	Stainless Steel 316L 316L (1.4404), C.PTFE, PTFE, C.PEEK
Pipe Connection:	3/4″ female thread BSP (NPT)
Optional Pipe Connections:	1″ Splint connection
Nozzle Characteristics:	4 x 3,0 mm Nozzles, 4 x 4,0 mm Nozzles
Certificates:	3.1, 2.2, ATEX, FDA Regulation (EC) No 1935/2004
Max. Operating Temperature:	95°C (203°F)
Max. Ambient Temperature:	140°C (284°F), 30 Min.
Operating Recommendation:	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Operating Values

Optimal Operation

The Optimal Presure Range for Operating the Twister is at 4 – 10 bar at the Cleaning Device.
With a Flowrate of 45 – 97 Liters/Minute a Cleaning Diameter of 8 – 16 Meters is achieved.

Measurements

Product Description

The Twister is a powerful target jet cleaner with orbital 360° spray pattern. An installation opening of only 100 mm is required to install a Twister. The Twister is driven by the cleaning medium at a pressure of 4 to 10 bar. Turbine-driven, radial and axial rotation of the nozzle head is generated. This produces aligned jets of liquid through four nozzles with a strong impact effect up to a diameter of 16 meters. By circulating jets of liquid, a completing spray pattern with full coverage is thus achieved within 2 to 3.5 minutes.

Thanks to optimum flow control, a smooth-running mechanism without ball bearings, and a hygienic sealing concept, the energy used on the unit develops into a powerful cleaning effect. The orbital cleaning behavior allows the best possible use of the cleaning liquid or chemical additives. For use in hygiene-sensitive areas, the unit keeps itself permanently clean with a self-cleaning nozzle and empties itself automatically after use in vertical operation.

The use of the device is always resource-saving and takes place with the least amount of wear and maintenance. The Twister meets the highest hygiene and safety standards and can be used in EX zones and FDA applications at the same time. During a long service life, this device will always prove to be a reliable partner for your cleaning tasks. Optionally, the cleaning process of a Twister can be permanently and non-invasively monitored by SMW 100 or Vericlean. The Twister is one of the latest and most effective developments on the market for cleaning technology.

Twister orbital cleaners are available in many connection options. The Twister is very compact and can be installed in any position in vessels or equipment using a 3/4″ threaded connection or a choice of cotter pin or clamp attachment. Use on a lance or hanging from a hose is also possible. Common applications for this product are tanks and vessels in brewing, beverage, dairy, food, pharmaceutical, chemical and transportation industries.

Connection Types

Threaded Connection

Twister standard devices are equipped with a 3/4″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 3/4″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

Splint Connection

The Twister orbital cleaner is optionally available with a 1″ splint pin attachment. The splint pin attachment ensures that the cleaning machine is attached without dead space. Splint pin versions have an approx. 15% higher flow rate.

Clamp Connection

The Twister is optionally available with a 1″ clamp connection. A clamp connection ensures the uncomplicated removal of the cleaning machine.

Twister - Product Selection Connection Types/Variants

Twister with 3/4″ Threaded Connection

Connection	Nozzles	Pipe*	Product Code	Materials	Certificates	Article Number
*corresponds to the max. pipe outer diameter of the pipe on which the machine is to be installed (inch or mm). Split pin versions have approximately 15% higher flow. Recommended standard units with high stock probability are shown in blue.
3/4″ IG-BSP	4 x 3,0 mm	3/4″	Twister-AF4x3S-BSP	316L/C.PTFE	ATEX+FDA, 3.1	4660-4990-111
3/4″ IG-BSP	4 x 3,0 mm	3/4″	Twister-F4x3S-BSP	316L/PTFE	FDA, 3.1	4660-4990-110
3/4″ IG-NPT	4 x 3,0 mm	3/4″	Twister-AF4x3S-NPT	316L/C.PTFE	ATEX+FDA, 3.1	4660-4990-112
3/4″ IG-NPT	4 x 3,0 mm	3/4″	Twister-F4x3S-NPT	316L/PTFE	FDA, 3.1	4660-4990-113
3/4″ IG-BSP	4 x 4,0 mm	3/4″	Twister-AF4x4S-BSP	316L/C.PTFE	ATEX+FDA, 3.1	4660-4990-121
3/4″ IG-BSP	4 x 4,0 mm	3/4″	Twister-F4x4S-BSP	316L/PTFE	FDA, 3.1	4660-4990-120
3/4″ IG-NPT	4 x 4,0 mm	3/4″	Twister-AF4x4S-NPT	316L/C.PTFE	ATEX+FDA, 3.1	4660-4990-122
3/4″ IG-NPT	4 x 4,0 mm	3/4″	Twister-F4x4S-NPT	316L/PTFE	FDA, 3.1	4660-4990-123

Twister with 1″ Splint Connection

Connection	Nozzles	Pipe*	Product Code	Materials	Certificates	Article Number
*corresponds to the max. pipe outer diameter of the pipe on which the machine is to be installed (inch or mm). Split pin versions have approximately 15% higher flow. Recommended standard units with high stock probability are shown in blue.
1″ Splint	4 x 3,0mm	3/4″	Twister-AF4x3S-100PF	316L/C.PTFE	ATEX+FDA, 3.1	4660-4990-124
1″ Splint	4 x 3,0mm	3/4″	Twister-F4x3S-100PF	316L/PTFE	FDA, 3.1	4660-4990-125
1″ Splint	4 x 4,0mm	3/4″	Twister-AF4x4S-100PF	316L/C.PTFE	ATEX+FDA, 3.1	4660-4990-126
1″ Splint	4 x 4,0mm	3/4″	Twister-F4x4S-100PF	316L/PTFE	FDA, 3.1	4660-4990-127

Accessories

Stand

Materials:	Stainless Steel 1.4404 (316L), PTFE
Certificates:	3.1, 2.2
Device Connection:	3/4″ AG-BSP
Supply Line:	as needed

Tank Cleaning Wagon

Materials:	Stainless Steel 316L (1.4404), PP (PTFE)
Certificates:	FDA, 3.1, 2.2
Device Connection:	3/4″ AG-BSP
Supply Line:	DN50 Threaded connection DIN 11851

Welded Adapter

Materials:	Stainless Steel 1.4404 (316L)
Certificates:	3.1, 2.2
Device Connection:	3/4″ AG-BSP
Supply Line:	Welded End

SMW 100 Fluid Sensor

Materials:	1.4305, PEEK
Connection Type:	Weld-in Socket
Function:	The surge of the sensor is displayed every 20 seconds

Installation Lance

Materials:	Stainless Steel 1.4404 (316L), EPDM, FKM
Certificates:	3.1, 2.2
Device Connection:	3/4″ AG-BSP (1″ Splint)
Tank connection:	Flange as needed
Sensor:	with/without SMW 100

Vericlean Rotation counter

Materials:	Stainless Steel 316L (1.4404), PTFE
Certificates:	3.1, 2.2
Device Connection:	3/4″ AG-BSP
Tank Connection:	Flange as needed
Sensortype:	IFM MFT200
Surveillance:	The rotation speed of the cleaning machine is permanently displayed

Maintenance Packages & Tools

Twister C.PTFE (ATEX & FDA)	4660-4050-888
Twister PTFE (FDA)	4660-4051-888
Werkzeugsatz:	4660-4031-888

Tempest orbital cleaner

brecmer — Fri, 06 Oct 2023 18:23:24 +0000

Tempest orbital cleaner

Extremely powerful, radially and axially rotating jet cleaner with 4 nozzles

fluid powered 360° low pressure orbital cleaner
extremely strong jet strength and high flow rate
FDA compliant & EX certified
acid, alkali and temperature resistant
compact dimensions
self-cleaning, hygienic, low-wear
validatable cleaning
Function monitoring by Vericlean or SMW 100

Technische Daten

Technical Data	Value
Max. cleaning diameter:	19 meters
Spray pattern:	360° orbital
Pressure range:	4 – 10 bar / 58-145 psi
Flow rate:	200 – 410 lpm (12,0 – 24,6 m³/h)
Insertion opening:	min. Ø 210 mm
Preferred mounting position:	arbitrary, preferrably vertical
Weight:	approx. 3,9 KG
Materials:	Stainless Steel 316L 316L (1.4404), C.PTFE, PTFE, C.PEEK
Pipe connection:	1,5″ female thread BSP (NPT)
Optional Pipe Connections:	1,5″ Splint, DN40 Splint, DN50 Splint, 1,5″ Clamp
Nozzle characteristics:	4 x 7,0 mm nozzles, 4 x 8 mm nozzles, 4 x 9 mm nozzles
Certificates:	3.1, 2.2, ATEX, FDA Regulation (EC) No 1935/2004
Max. operating temperature:	95°C (203°F)
Max. ambient temperature:	140°C (284°F), 30 Min.
Operating recommendation:	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Operating values

Optimal Operation

The pressure range for operating the Tempest is 4 – 10 bar at the cleaning machine.

With a flow rate of 200 – 410 liters/minute, a cleaning diameter of 12 – 19 meters is achieved.

Dimensions

Product description

The Tempest is a powerful target jet cleaner with an orbital 360° spray pattern. The Tempest is driven by the cleaning medium at a pressure of 4 to 8 bar. Turbine-driven, a radial and axial rotation of the nozzle head is generated. This creates aligned jets of liquid through four long nozzles with a strong impact effect up to a diameter of 19 metres. By circulating jets of liquid, a completing spray pattern with high coverage and full coverage is thus produced within 5 to 9.5 minutes.

Thanks to optimal flow control, a smooth-running mechanism without ball bearings and a hygienic sealing concept, the energy used on the unit is transformed into a powerful cleaning effect. The orbital cleaning behaviour enables the best possible use of the cleaning liquid or chemical additives. For use in hygiene-sensitive areas, the unit keeps itself permanently clean with a self-cleaning nozzle and empties itself automatically after use in vertical operation.

The use of the unit always conserves resources and requires minimal wear and maintenance. The Tempest meets the highest hygiene and safety standards and can be used in EX zones and FDA applications at the same time. During a long service life, this unit will always prove to be a reliable partner for your cleaning tasks. Tempest orbital cleaners are available in many connection variants. Optionally, the cleaning process of a Tempest can be permanently and non-invasively monitored by SMW 100 or Vericlean. The Tempest is one of the latest and most effective developments in the cleaning technology market.

Tempest orbital cleaners are available with many connection variants. is very compact and can be installed in any position in vessels or equipment using a 1,5” threaded connection or a choice of cotter pin or clamp mounting. It can also be used on a lance or hanging from a hose. Frequent areas of application for this product are tanks and containers in the brewing, beverage, dairy processing, food, pharmaceutical, chemical and transport industries as well as on ships.

Connection types

Threaded connection

Tempest standard devices are equipped with a 1,5″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 1,5″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

Splint connection

The Tempest orbital cleaner is optionally available with a 1,5″, DN40 or DN50 splint pin attachment. The splint pin attachment ensures that the cleaning machine is attached without dead space. Splint pin versions have an approx. 15% higher flow rate.

Clamp connection

The Tempest is optionally available with a 1,5″ clamp connection. A clamp connection ensures the uncomplicated removal of the cleaning machine.

Tempest product selection - Connection types/variants

Tempest BSP Threaded connection

Attachment	Nozzles	Pipe*	Product code	Materials	Certificates	Article Number
*corresponds to the maximum pipe OD of the pipe on which the machine is to be installed (inches or mm). Splint pin versions have an approx. 15% higher flow rate. Recommended standard devices with a high probability of being in stock are set in blue.
1,5″ IG-BSP	4 x 7,0 mm	1,5″	Tempest-AF4x7S-BSP	316L/C.PTFE	ATEX+FDA, 3.1	4660-4968-117
1,5″ IG-BSP	4 x 7,0 mm	1,5″	Tempest-F4x7S-BSP	316L/PTFE	FDA, 3.1	4660-4968-119
1,5″ IG-BSP	4 x 7,0 mm	1,5″	Tempest-AF4x7S-NPT	316L/C.PTFE	ATEX+FDA, 3.1	4660-4968-121
1,5″ IG-BSP	4 x 7,0 mm	1,5″	Tempest-F4x7S-NPT	316L/PTFE	FDA, 3.1	4660-4968-123
1,5″ IG-BSP	4 x 8,0 mm	1,5″	Tempest-AF4x8S-BSP	316L/C.PTFE	ATEX+FDA, 3.1	4660-4968-118
1,5″ IG-BSP	4 x 8,0 mm	1,5″	Tempest-F4x8S-BSP	316L/PTFE	FDA, 3.1	4660-4968-120
1,5″ IG-BSP	4 x 8,0 mm	1,5″	Tempest-AF4x8S-NPT	316L/C.PTFE	ATEX+FDA, 3.1	4660-4968-122
1,5″ IG-BSP	4 x 8,0 mm	1,5″	Tempest-F4x8S-NPT	316L/PTFE	FDA, 3.1	4660-4968-124
1,5″ IG-BSP	4 x 9,0 mm	1,5″	Tempest-AF4x9S-BSP	316L/C.PTFE	ATEX+FDA, 3.1	–
1,5″ IG-BSP	4 x 9,0 mm	1,5″	Tempest-F4x9S-BSP	316L/PTFE	FDA, 3.1	–
1,5″ IG-BSP	4 x 9,0 mm	1,5″	Tempest-AF4x9S-NPT	316L/C.PTFE	ATEX+FDA, 3.1	–
1,5″ IG-BSP	4 x 9,0 mm	1,5″	Tempest-F4x9S-NPT	316L/PTFE	FDA, 3.1	–

Tempest with 1,5″ Splint attachment

Attachment	Nozzles	Pipe*	Product code	Materials	Certificates	Article Number
*corresponds to the maximum pipe OD of the pipe on which the machine is to be installed (inches or mm). Splint pin versions have an approx. 15% higher flow rate. Recommended standard devices with a high probability of being in stock are set in blue.
1,5″ Splint	4 x 7,0 mm	38,1	Tempest-AF4x7S-150PF	316L/C.PTFE	ATEX+FDA, 3.1	4660-4968-125
1,5″ Splint	4 x 7,0 mm	38,1	Tempest-F4x7S-150PF	316L/PTFE	FDA, 3.1	4660-4968-127
1,5″ Splint	4 x 8,0 mm	38,1	Tempest-AF4x8S-150PF	316L/C.PTFE	ATEX+FDA, 3.1	4660-4968-126
1,5″ Splint	4 x 8,0 mm	38,1	Tempest-F4x8S-150PF	316L/PTFE	FDA, 3.1	4660-4968-128
1,5″ Splint	4 x 9,0 mm	38,1	Tempest-AF4x9S-150PF	316L/C.PTFE	ATEX+FDA, 3.1	–
1,5″ Splint	4 x 9,0 mm	38,1	Tempest-F4x97S-150PF	316L/PTFE	FDA, 3.1	–

Tempest with DN40 Splint attachment

Attachment	Nozzles	Pipe*	Product code	Materials	Certificates	Article Number
*corresponds to the maximum pipe OD of the pipe on which the machine is to be installed (inches or mm). Splint pin versions have an approx. 15% higher flow rate. Recommended standard devices with a high probability of being in stock are set in blue.
DN40 Splint	4 x 7,0 mm	41,15	Tempest-AF4x7S-DN40	316L/C.PTFE	ATEX+FDA, 3.1	–
DN40 Splint	4 x 7,0 mm	41,15	Tempest-F4x7S-DN40	316L/PTFE	FDA, 3.1	–
DN40 Splint	4 x 8,0 mm	41,15	Tempest-AF4x8S-DN40	316L/C.PTFE	ATEX+FDA, 3.1	–
DN40 Splint	4 x 8,0 mm	41,15	Tempest-F4x8S-DN40	316L/PTFE	FDA, 3.1	–
DN40 Splint	4 x 9,0 mm	41,15	Tempest-AF4x9S-DN40	316L/C.PTFE	ATEX+FDA, 3.1	–
DN40 Splint	4 x 9,0 mm	41,15	Tempest-F4x9S-DN40	316L/PTFE	FDA, 3.1	–

Tempest with DN50 Splint attachment

Attachment	Nozzles	Pipe*	Product code	Materials	Certificates	Article Number
*corresponds to the maximum pipe OD of the pipe on which the machine is to be installed (inches or mm). Splint pin versions have an approx. 15% higher flow rate. Recommended standard devices with a high probability of being in stock are set in blue.
DN50 Splint	4 x 7,0 mm	53,25	Tempest-AF4x7S-DN50	316L/C.PTFE	ATEX+FDA, 3.1	–
DN50 Splint	4 x 7,0 mm	53,25	Tempest-F4x7S-DN50	316L/PTFE	FDA, 3.1	–
DN50 Splint	4 x 8,0 mm	53,25	Tempest-AF4x8S-DN50	316L/C.PTFE	ATEX+FDA, 3.1	–
DN50 Splint	4 x 8,0 mm	53,25	Tempest-F4x8S-DN50	316L/PTFE	FDA, 3.1	–
DN50 Splint	4 x 9,0 mm	53,25	Tempest-AF4x9S-DN50	316L/C.PTFE	ATEX+FDA, 3.1	–
DN50 Splint	4 x 9,0 mm	53,25	Tempest-F4x9S-DN50	316L/PTFE	FDA, 3.1	–

Tempest with 1.5″ Clamp attachment

Attachment	Nozzles	Pipe*	Product code	Materials	Certificates	Article Number
*corresponds to the maximum pipe OD of the pipe on which the machine is to be installed (inches or mm). Splint pin versions have an approx. 15% higher flow rate. Recommended standard devices with a high probability of being in stock are set in blue.
1,5″ Clamp	4 x 7,0 mm	1,5″	Tempest-AF4x7S-150CL	316L/C.PTFE	ATEX+FDA, 3.1	–
1,5″ Clamp	4 x 7,0 mm	1,5″	Tempest-F4x7S-150CL	316L/PTFE	FDA, 3.1	–
1,5″ Clamp	4 x 8,0 mm	1,5″	Tempest-AF4x8S-150CL	316L/C.PTFE	ATEX+FDA, 3.1	–
1,5″ Clamp	4 x 8,0 mm	1,5″	Tempest-F4x8S-150CL	316L/PTFE	FDA, 3.1	–
1,5″ Clamp	4 x 9,0 mm	1,5″	Tempest-AF4x9S-150CL	316L/C.PTFE	ATEX+FDA, 3.1	–
1,5″ Clamp	4 x 9,0 mm	1,5″	Tempest-F4x9S-150CL	316L/PTFE	FDA, 3.1	–

Accessories

Safety cage (co-rotating)

Materials:	Stainless steel 1.4404 (316L), PTFE
Certificates:	3.1, 2.2
Device attachment:	1,5″ AG-BSP
Supply:	Welding connection for 41 mm pipe or 1.5″ AG-BSP

Welded adapter

Materials:	Stainless steel 1.4404 (316L)
Certificates:	3.1, 2.2
Device attachment:	1,5″ AG-BSP
Supply:	Welding end

Stand

Materials:	Stainless steel 1.4404 (316L), PTFE
Certificates:	3.1, 2.2
Device attachment:	1,5″ AG-BSP
Supply:	as required

Tank cleaning wagon

Materials:	Stainless steel 316L (1.4404), PP (PTFE)
Zertifikate:	FDA, 3.1, 2.2
Device attachment:	1,5″ AG-BSP
Supply:	DN50 Thread connection DIN 11851

Installation lance

Materials:	Stainless steel 1.4404 (316L), EPDM, FKM
Certificates:	3.1, 2.2
Device attachment:	1,5″ AG-BSP (1″ Splint)
Tank connection:	Flange as required
Sensor:	with/without SMW 100

Vericlean rotation monitor

Materials:	Stainless steel 316L (1.4404), PTFE
Certificates:	3.1, 2.2
Device attachment:	3/4″ AG-BSP
Tank connection:	Flange as required
Sensor type:	IFM MFT200
Monitoring:	The rotation speed of the cleaning machine is permanently displayed.

SMW 100 Fluid sensor

Materials:	1.4305, PEEK
Connecton type:	Welded socket
Function:	Sensor surge is displayed every 20 seconds.

Maintenance packages & Toolkit

Tempest C.PTFE (ATEX & FDA)	4660-4050-888
Tempest PTFE (FDA)	4660-4051-888
Toolkit:	4660-4031-888

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 17.10.2022-71427321893-1888948-71042)

self-cleaning – Breconcherry Industrielle Reinigungssysteme

IS25 Retractor

Retractor IS25

IS25 retractor with static nozzle

The advantages of the IS 25 at a glance:

Function

Retraktor IS25

Turbo SSB 40

Turbo SSB 40 Rotating Nozzle

Plain bearing nozzle with slow rotation

Optimal Operation

Threaded Connection

Splint Connection

Turbo SSB 40 Threaded and Splint pin connection

Installation Lance

SMW 100 Fluid Control Sensor

Turbo SSB 75

Turbo SSB 75 Rotating Nozzle

Plain bearing nozzle with slow rotation

Optimal Operation

Threaded Connection

Splint Connection

Turbo SSB 75 Threaded and Split pin connection

Turbo SSB 75 CS Threaded and Split pin connection

Installation Lance

SMW 100 Fluidity Sensor

Turbo SSB 125

Turbo SSB 125 Rotating Nozzle

Plain bearing nozzle with slow rotation

Optimal Operating

Threaded Connection

Splint Connection

Turbo SSB 125 Threaded and Split pin connection

Installation Lance

SMW 100 Fluid Sensor

Sanitor

Sanitor Rotating Nozzle

Jetforming, slowly rotating and heat-resistant rotating nozzle

Optimal Operating

Threaded Connection

Splint Connection

Sanitor Threaded and Splint pin connection

Installation Lance

SMW 100 Fluid Control Sensor

Troll Ball 2

Troll Ball 2″ Rotating Nozzle

Plain bearing, jetforming, slowly rotating rotating nozzle with strong cleaning effect

Optimal Operation

Threaded Connection

Troll Ball 2″ FJ – Fan-Jet Nozzles

Troll Ball 2″ AV – Anti-Vibration/Full jet nozzles

Troll Ball 2″ BSP Threaded Connection

Troll Ball 2″ NPT Threaded Connection

Troll Ball 2″ BSPT Threaded Connection

Installation Lance

SMW 100 Fluid Control Sensor

Maintenance Package PTFE

Mainteance Package C.PTFE

Maintenance Package PEEK

Troll Ball 3

Troll Ball 3″ Rotating Nozzle

Plain bearing, rotating nozzle with slow rotation and a strong cleaning effect

Optimaler Betrieb

Threaded Connection

Troll Ball 3″ BSP Threaded Connection

Troll Ball 3″ NPT Threaded Connection

Troll Ball 3″ BSPT Gewindeanschluss

Installation Lance

SMW 100 Fluid Control Sensor

Maintenance packages PTFE

Maintenance packages C.PTFE

Maintenance packages PEEK

Turbo CW 25/75 EN

Turbo CW 25/75 Target cleaner

Target cleaning of an area, hygienic & self-cleaning

Turbo CW 25

Turbo CW 75

Turbo CW 25

Turbo CW 75

Turbo CW 25

Target cleaning of an area,
hygienic & self-cleaning