Messing – Breconcherry Industrielle Reinigungssysteme https://www.breconcherry.de Innovative Reinigungssysteme für die Industrie Wed, 26 Aug 2026 14:15:36 +0000 en-GB hourly 1 https://wordpress.org/?v=7.1.2 https://www.breconcherry.de/wp-content/uploads/cropped-cropped-Breconcherry-Logo.png-32x32.webp Messing – Breconcherry Industrielle Reinigungssysteme https://www.breconcherry.de 32 32 Spray balls TM-Series 1/8″ – 2″ https://www.breconcherry.de/en/products-en/spray-balls-tm-series-1-8-2/ Sun, 29 Oct 2023 13:09:52 +0000 https://www.breconcherry.de/?p=16415

Spray balls – TM-Series 1/8″ – 2″

Sprühkugeln - TM-Reihe (feststehende Sprühkugel)

Extensive selection of special designs

  • 1.0 to 8.0 meter cleaning diameter
  • 7 different spray pattern types available
  • suitable for use in FDA & EX environment
  • acid, alkali & temperature resistant
  • 9 different ball sizes available
  • inexpensive to purchase, reliable operation
  • reasonable selection of high quality materials

Technical Data

Technical Data Value
Max. Cleaning Diameter: 8 meters
Spraypattern: 90° up to 330°
Pressure-range: 0,5 – 20 bar
Flowrate: 0,1 – 1635 LPM (0,006 – 98,1 m³/h)
Insertion Opening: 15 mm up to 72 mm
Mounting position: arbitrary
Materials: Stainless Steel 316L (1.4404)
Standard connection: Internal thread or clamping with union nut
Surface: polished
Nozzle characteristic: static ball with holes
Certificates: 3.1 DIN EN 10204, 2.2
Operating recommendation: It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Dimensions-TM Dimensions-TMA Dimensions-TMUE
TM 3/8“ up to 2“
until 330° possible,
Flowrate on demand		 TMA 1/8“ and 1/4“
until 300° possible,
Flowrate on demand		 TMÜ Clamping of the
nozzle mouthpiece with
union nut 3/8″,
Flowrate on demand

V *: Volume flow
G Dimensions in mm SW max. V *
(l/min)
at 3 bar		 max.
Bore number		 max.
bore Ø in mm
D d L
1/8″ 13 13 26 11 16 13 1,0
1/4″ 16 16 30 15 29 19 1,5
3/8″ 24 21 36 22 45 37 2,0
1/2″ 29 26 45 27 88 43 2,5
3/4″ 34 31 54 32 181 74 3,0
1″ 38 35 60 36 282 96 4,0
1 1/4″ 50 50 78 46 410 108 5,0
1 1/2″ 64 64 98 59 577 120 6,0
2″ 70 70 106 64 1000 144 8,0

Bores and distribution types possible according to customer requirements. When selecting the number and bore Ø, the volume flow should not be significantly exceeded.
Bore-
Ø
(mm)		 Volume flow in l/min at pressure p (bar)
for 1 drill (bore)		 max.
recommended
Tank-Ø
(m)
0,5
bar		 1
bar
 2
bar
 3
bar
 5
bar
 10
bar
 15
bar
 20
bar
0,6 0,10 0,14 0,20 0,24 0,32 0,45 0,55 0,63 0,3
0,8 0,20 0,28 0,40 0,45 0,60 0,89 1,10 1,26 0,4
1,0 0,35 0,50 0,70 0,85 1,10 1,57 1,92 2,21 0,6
1,5 0,75 1,07 1,50 1,83 2,37 3,36 4,11 4,74 1,0
2,0 1,20 1,70 2,40 2,93 3,79 5,37 6,58 7,58 1,5
2,5 2,05 2,91 4,10 5,00 6,48 11,2 11,2 12,9 2,0
3,0 3,00 4,26 6,00 7,32 9,40 13,5 16,4 19,0 3,0
4,0 4,20 5,96 8,40 10,4 13,3 19,7 23,0 26,5 5,0
5,0 7,00 9,90 14,0 17,1 22,1 32,8 38,4 44,2 8,0

High liquid volumes enable fixed spray balls to realize a thorough cleaning even at low pressure. By bombarding and rinsing the inner walls of the container the high cleaning effect is achieved. Adding suitable cleaning agents can even result in an improvement of the cleaning effect. As a consequence the cleaning time is shortened.

Two modes of operation are possible
– impulse-pause operation
– permanent flushing

Compared to the permanent blasting, the impulse-pause operation will cause a reduction of the cleaning liquid quantity while maintaining the same cleaning time. This procedure allows the cleaning medium that is used to develop its full effect.

Type F Type B Type I Type G
Spritzmuster-TM-Reihe-F Spritzmuster-TM-Reihe-B Spritzmuster-TM-Reihe-I Spritzmuster-TM-Reihe-G
300 – 330°
Standard from 3/8”
37 holes		 180°
Standard from 3/8”
25 holes		 180 – 300° or 330°
Standard from 3/8”
25 holes		 90 – 120°
90° 13 holes
120° 19 holes
Type N Type P Type O
Spritzmuster-TM-Reihe-N Spritzmuster-TM-Reihe-P Spritzmuster-TM-Reihe-O
on request on request Rohrreinigung

Type TM – F – 330°

Bore sizes and distribution patterns available to customer specification. When selecting quantity and bore diameter, the flow rate should not be significantly exceeded.
TM
F – 330°		 Flow rate l/min at pressure p (bar)
37 bore
0,5
bar		 1
bar
 2
bar
 3
bar
 5
bar
 10
bar
 15
bar
 20
bar
0,6 3,70 5,18 7,40 8,88 11,8 16,6 20,4 23,3
0,8 7,40 10,4 14,8 16,6 22,2 33,0 40,3 46,6
1,0 12,8 18,5 25,9 31,4 40,7 58,1 70,7 81,8
1,5 27,8 39,6 55,5 67,7 87,7 124 152 175
2,0 44,4 63,3 88,8 108 140 199 243 280
2,5 75,8 108 152 185 238 414 415 479
3,0 111 158 222 271 348 500 608 701
4,0 155 220 311 385 492 729 851 980
5,0 259 366 518 632 818 1214 1421 1635

Type TM – B + I – 180°

Bore sizes and distribution patterns available to customer specification. When selecting quantity and bore diameter, the flow rate should not be significantly exceeded.
TM
B+I 330°		 Flow rate l/min at pressure p (bar)
25 bore
0,5
bar		 1
bar
 2
bar
 3
bar
 5
bar
 10
bar
 15
bar
 20
bar
0,6 2,50 3,50 5,00 6,00 8,00 11,2 13,8 15,8
0,8 5,00 7,00 10,0 11,2 15,0 22,2 27,2 31,5
1,0 8,75 12,5 17,5 21,2 27,5 39,2 47,8 55,2
1,5 18,8 26,8 37,5 45,8 59,2 84,0 103 118
2,0 30,0 42,5 60,0 73,2 94,8 134 164 190
2,5 51,2 72,8 102 125 162 280 281 324
3,0 75,0 106 150 183 235 338 411 474
4,0 105 149 210 260 332 492 575 662
5,0 175 248 350 428 552 820 960 1105

Type TM – G – 120°

Bore sizes and distribution patterns available to customer specification. When selecting quantity and bore diameter, the flow rate should not be significantly exceeded.
TM
G – 120°		 Flow rate l/min at pressure p (bar)
19 bore
0,5
bar		 1
bar
 2
bar
 3
bar
 5
bar
 10
bar
 15
bar
 20
bar
0,6 1,90 2,66 3,80 4,56 6,08 8,55 10,4 12,0
0,8 3,80 5,32 7,60 8,55 11,4 16,9 20,7 23,9
1,0 6,65 9,50 13,3 16,2 20,9 29,8 36,3 42,0
1,5 14,2 20,3 28,5 34,8 45,0 63,8 78,1 90,1
2,0 22,8 32,3 45,6 55,7 72,0 102 125 144
2,5 39,0 55,3 77,9 95,0 123 174 213 246
3,0 57,0 80,9 114 139 179 256 312 360
4,0 80,0 113 210 260 332 374 437 504
5,0 133 188 266 325 420 623 730 840

Type TM – G – 90°

Bore sizes and distribution patterns available to customer specification. When selecting quantity and bore diameter, the flow rate should not be significantly exceeded.
TM
G – 90°		 Flow rate l/min at pressure p (bar)
13 bore
0,5
bar		 1
bar
 2
bar
 3
bar
 5
bar
 10
bar
 15
bar
 20
bar
0,6 1,30 1,82 2,60 3,12 4,16 5,85 7,15 8,19
0,8 2,60 3,64 5,20 5,85 7,80 11,57 14,17 16,4
1,0 4,55 6,50 9,10 11,0 14,3 20,4 24,8 28,7
1,5 9,75 13,9 19,5 23,8 30,8 43,7 53,4 61,6
2,0 15,6 22,1 31,2 38,1 49,3 69,8 85,4 98,5
2,5 26,6 37,8 53,3 65,0 84,2 118 146 168
3,0 39,0 55,4 78,0 95,2 122 176 214 246
4,0 54,6 77,5 109 135 173 248 299 344
5,0 91,0 129 180 222 287 426 499 575

Installationslanze

Installationslanze-TM-Reihe

Materials: Stainless steel 1.4404 (316L), EPDM, FKM
Certificates: 3.1, 2.2
Unit connection: siehe Tabelle
Tank connection: Flange on request
Sensor: without SMW 100

The information, technical data and details shown do not release the user from checking the delivered products for their suitability for the intended application. All information is provided without guarantee. (As of: 02.08.2022-71427321893-1888948-71042)

]]>